Important Safety Information - Sharp AR-FX9 - Fax Interface Card Facsimile Manual

This equipment has been tested according to the pan-European TS103 021
regulation. It will operate on all analogue telephone networks which comply with the
TS103 021.
Please contact your dealer or network operator, if you are not sure whether your
network operates according to TS103 021.

Important safety information

• If any of your telephone equipment is not operating properly, you should
immediately remove it from your telephone line, as it may cause harm to the
telephone network.
• The AC power outlet shall be installed near the equipment and shall be easily
accessible.
• Never install telephone wiring during a lightning storms.
• Never install telephone jacks in w et locations unless the jack is specifically
designed for wet locations.
• Never touch uninsulated telephone wires or terminals unless the telphone line has
been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• Avoid using a telephone (other than a cordless type) during an electrical storm.
There may be a remote risk of electric shock from lightning.
• Do not install or use the machine near water, or when you are wet. Take care not to
spill any liquids on the machine.
The Declaration of Conformity can be viewed at the following URL address.
http://www.sharp.de/doc/AR-FX9.pdf
Note
• This manual describes how to use the fax function of the machine.
Part names and functions shared with the copy function (for example, the
misfeed indicator and add paper indicator), are described in the Operation
Manual. For more information, please read the Operation Manual.
• This manual (fax function) refers to the Single Pass Feeder as the "SPF"
and to the Reversing Single Pass Feeder as the "RSPF".