Anti Junk Fax - Sharp AR-FX9 - Fax Interface Card Facsimile Manual

ANTI JUNK FAX

You can avoid wasting fax paper by using the Anti Junk Fax function. This function blocks reception of faxes from up
to ten specified parties.
To turn the Anti Junk Fax feature on and off, use the following procedure:
1
Press the [MENU] key.
1,2,3,
1,2,3,
2
Press the [ ] key (
until "5:ANTI JUNK FAX" appears, and
then press the [OK] key.
Selection
"5:ANTI JUNK FAX"
3
Press the [ ] key (
to select "1:ANTI JUNK SELECT" and
press the [OK] key.
Selection
"1:ANTI JUNK SELECT"
4
Press the [ ] key (
to select "1:ON" or "2:OFF" and press
the [OK] key.
1,2,3,
1,2,3,
5
Press the [MENU] key.
1,2,3,
1,2,3,
80
) or [ ] key (
) or [ ] key (
) or [ ] key (
Press the [MENU] key to
exit.
)
)
)