Final Preparations; Connecting Other Devices - Sharp AR-FX9 - Fax Interface Card Facsimile Manual

Operation Manual (for general information)
Explains the machine and how to use it as a copier. Also explains how to install the software that allows the machine
to be used as a printer and scanner for your computer.
The following information is contained in the operation manual for the machine :
OPERATION MANUAL contents
CAUTIONS
PART NAMES
POWER ON AND OFF
LOADING THE PAPER TRAY
BYPASS FEED (including special paper)
Online Manual (on the CD-ROM)
This manual explains the procedures for using the machine as a printer and a scanner.

FINAL PREPARATIONS

CONNECTING OTHER DEVICES

If desired, an answering machine or external telephone can be connected to the machine through the telephone
jack, labeled "TEL," on the rear of the machine.
● Connecting an answering machine to the machine allows you to receive both voice and fax messages when you
are out. To use this feature, first change the outgoing message of your answering machine, and then set the
reception mode of the machine to "A.M." (Answering Machine mode) when you go out.
Comments:
1. It is advisable to keep the length of the message under 10 seconds. If it is too long, you may have difficulty
receiving faxes sent by automatic dialing.
2. Your callers can even leave a voice message and send a fax message on the same call. Modify your outgoing
message to explain that this can be done by pressing their [START] key (
● You can connect an extension phone to the machine to make and receive calls like any other extension phone on
your line. Even if you pick up the extension phone and hear a fax tone, the machine will automatically cut in and
take over the line. Note, however, if you also have a PC modem on the same line, you must turn on the Remote
Reception function, and deactivate the Fax Signal Receive function. See "SETTING UP THE MACHINE FOR
USE WITH A PC MODEM" (p.37) and "USING THE REMOTE RECEPTION FUNCTION" (p.38).
Note The Remote Reception function is initially set to "ON".
12
Page OPERATION MANUAL contents
3 CHANGING A TRAY'S PAPER SIZE
SETTING
9
MISFEED REMOVAL
12
TONER CARTRIDGE REPLACEMENT
15
CHECKING THE TOTAL COUNT
17
CLEANING THE MACHINE
OPTIONAL EQUIPMENT
) after leaving their voice message.
Page
19
79
85
87
88
90