Canceling A Timer Transmission Job - Sharp AR-FX9 - Fax Interface Card Facsimile Manual

6
Press the [ ] key (
to select the day of the week and
press the [OK] key.
1,2,3,
1,2,3,
7
Press the [ ] key (
to select the transmission mode and
press the [OK] key.
1,2,3,
1,2,3,

CANCELING A TIMER TRANSMISSION JOB

After a timer transmission job is set up, the job goes on standby until the specified time of transmission. If necessary,
the MEMORY STATUS function can be used to cancel a timer transmission job that is on standby ("CANCELING
(DELETING) A STORED FAX JOB" on page 61).
) or [ ] key ( )
) or [ ] key ( )
The selections are as
follows:
1:SEND MODE
2:BROADCAST MODE
3:POLLING MODE
4:SERIAL POLL MODE
8
Enter the fax number of the other
machine using one of the following
methods:
• Press a Rapid key.
• Enter a Speed Dial number with the numeric
keys.
• Enter the fax number with the numeric keys.
9
Press the [OK] key.
1,2,3,
1,2,3,
SPECIAL FUNCTIONS
79
5