Sharp AR-FX9 - Fax Interface Card Facsimile Manual page 11

Menu item
5 :ANTI JUNK FAX
1 : ANTI JUNK SELECT
2 : JUNK FAX #
6 : A.M. MODE
1: QUIET DETECT TIME
2 : AUTO RECEIVE
7 : MEMORY POLL MODE
1 : 1 TIME
2 : REPEAT
8 : POLLING MODE
9 : SERIAL POLL MODE
*
Transfer is only possible when a received fax is being held in memory because printing was not possible. In this case, "0:RX
DATA TRANSFER" will appear in the display.
* Please note that the PBX setting is only available in Denmark, Finland, Iceland, Norway and Sweden.
For the other countries, the parameter "22. PBX setting" is replaced by "22 : 2-SIDED RX" and followed by "23 :
TRAY SELECTION".
Settings (factory default setting appears in bold)
Enable the anti junk function to block fax reception from
specified fax numbers.
1 : ON
2 : OFF
Program (or delete) fax numbers from which fax reception is to
be blocked.
1 : SET
2 : CLEAR
Activate fax reception when a period of silence longer than the
set time is detected.
00 - 10 (05)
Enable fax reception when the answering machine is full and
cannot receive messages or otherwise fails.
1 : ON
2 : OFF
Perform polling transmission once.
Perform polling transmission repeatedly.
Poll another fax machine.
Sequentially poll multiple fax machines.
Page
80
81
47
48
74
74
72
73
9