A Look At The Fax Operation Panel - Sharp AR-FX9 - Fax Interface Card Facsimile Manual

A LOOK AT THE FAX OPERATION PANEL

01
10
06
15
Rapid keys
1
Press one of these keys to dial a fax or telephone
number automatically.
[MEMORY] key / indicator
2
Used for sending faxes in memory (indicator is lit)
or direct sending (indicator is not lit).
[SPEED/SEARCH] key
3
Press this key to dial a two digit Speed Dial
number.
During character inputting, use this key to delete
an incorrect entry.
Also, press this key twice to search for an
automatic dialing number.
[BROADCAST] key
4
Press this key to send originals to a group of
receiving fax machines.
[RECEPTION MODE] key
5
Press this key to select the mode of reception.
[REDIAL/PAUSE] key
6
Press this key to automatically redial the last
number you dialed.
Also, press this key to insert a pause when
entering numbers.
Display
7
Shows various messages during fax operation and
programming.
14
1
02 03 04 05
11 12 13 14
07 08 09
16 17 18 SHIFT
10
2 3
4 5
SPEED/ BROAD- RECEPTION
MEMORY SEARCH CAST MODE
COVER
RESOLU-
SHEET
TION CONTRAST REPORT
LINE STATUS SPEAKER
11 12 13 14 15
[CLEAR] key (
8
Press this key to stop an operation before it is
completed, or to delete the number that was last
input.
When a setting menu appears, use this key to
move back to the previous menu level.
[CLEAR ALL] key (
9
This returns all functions to the default settings.
When pressed in a setting menu, this returns the
settings and display to the initial state.
[SHIFT] key / indicator
10
Press this key to switch between upper and lower
case.
[RESOLUTION] key
11
Press this key to adjust the resolution before
sending faxes.
[CONTRAST] key
12
Press this key to adjust the contrast before sending
faxes.
[COVERSHEET] key
13
Press this key to automatically add a cover sheet
and message to a fax.
LINE STATUS indicator
14
Lit when sending/receiving faxes, blinking when
receiving data.
6
REDIAL/
PAUSE
AR-FX9
2-SIDED
TX
16 17 18
)
)
19 20 21