Important Safety Information - Sharp FO-2150 Operation Manual

Important safety information

For your safety, if any of your equipment is not operating properly or
should any physical damage occur to the equipment where internal parts
may become exposed, the equipment should be immediately discon-
nected from the phone line and then the power line and returned to a
SHARP authorised Service Centre for inspection, repair, or disposal.
In Australia, installing or modifying telephone lines should only be done
by an ACA licensed serviceman. In New Zealand, installing or modifying
telephone lines should be done in accordance with Telecom wiring
practices.
Do not disassemble this machine or attempt any procedures not described
in this manual. Refer all servicing to qualified service personnel.
This machine must only be connected to a 230-240 V, 50 Hz, grounded
(3-prong) outlet. Connecting it to any other kind of outlet may damage
the machine.
Do not install or use the machine near water, or when you are wet. Take
care not to spill any liquids on the machine.
Unplug the machine from the power outlet and telephone socket and
consult a qualified service representative if any of the following situations
occur:
- Liquid has been spilled into the machine or the machine has been
exposed to rain or water.
- The machine produces odors, smoke, or unusual noises.
- The power cord is frayed or damaged.
- The machine has been dropped or the housing damaged.
Do not allow anything to rest on the power cord, and do not install the
machine where people may walk on the power cord.
vii