Installing The Modem - D-Link DSL-520B User Manual

Section 2 - Installing The Modem
• Connect an RJ-11 cable between the wall phone jack and the DSL port on the rear panel of the modem.
• To use the Ethernet connection, connect the Ethernet cable from the computer directly to the modem. Connect one end of the
Ethernet cable to the port labeled LAN on the back of the modem and attach the other end to the Ethernet port of your computer.
• If your LAN has more than one computer, you can attach one end of an Ethernet cable to a hub or a switch and the other to the
Ethernet port (labeled LAN) on the modem. Note that either a crossover or straight-through Ethernet cable can be used. The
modem automatically recognizes the type of connection that is required.
D-Link DSL-520B ADSL2+ Modem User Manual

Installing the Modem

Connect the ADSL and Telephone Lines
Connect the PC to the Modem
7