Palm Treo 700P Using Manual page 62

2. If the Do you want to switch to Flash mode prompt appears,
select Yes.
3. While in Flash mode, do any of the following:
• If you have one active call and answer an incoming second
call, press Send
• If you have one active call, to make an outgoing second call,
dial the number using any of the methods described in Making
calls.
• If you have one active call and place an outgoing second call,
press Send
second party to set up a conference session using three-way
calling.
• If you have two calls in conference, press Send
up one of the calls; you can then dial another number and
place the new caller into the conference session.
4. To exit Flash mode and end all the calls, press Power/End
Using Your Treo 700
to swap between the calls.
after establishing a connection with the
Smartphone
P
Managing active calls
to hang
.
56