Palm Treo 700P Using Manual page 24

4. Install the desktop synchronization software from your new Palm
Software Installation CD (see Installing the desktop
synchronization software).
[ ! ] IMPORTANT
smartphone with any previous versions of Palm Desktop software.
5. During the installation process, sync your new Treo smartphone
with your new desktop software as instructed. When prompted, do
the following:
• Connect your new smartphone to your computer (see
Connecting your Treo smartphone to your computer).
• Indicate whether you want to sync all applications or only PIM
applications.
• Select a device name for your new smartphone; be sure to
select the same name that you used for your old device. (This
is the name that appears in the User list in Palm Desktop
software.)
6.
(Mac users only)
them from your previous device to an expansion card or beam
them to your new Treo 700
7. If you plan to continue using your previous device, perform a hard
reset to remove its associated device name. (See the
documentation that came with your previous device for
instructions on performing a hard reset.) Each device you
synchronize with your computer must have a unique name. The
next time you synchronize your previous device with your
computer, be sure to assign it a new name.
Using Your Treo 700
Do not synchronize your new Treo 700
If you have pictures on your previous device, copy
smartphone.
P
Smartphone
P
Setting up your computer
P
18