0
1.
Connect your Treo 700
described in Connecting your Treo smartphone to your computer.
If you're performing initial setup, you smartphone
[ * ] NOTE
should already be connected to your computer.
2.
Press the sync button on the sync cable.
3.
A message indicates that synchronization is in progress.
4.
Wait for a message that indicates that the process is complete
before you disconnect the sync cable.
If you're finishing your initial setup, you now have the option to install
bonus software from the Palm Software Installation CD. If you choose to
install some of the bonus software, you need to sync again to install the
software on your smartphone. You can also install bonus software later,
see Installing bonus software from the CD.
Using Your Treo 700
smartphone to your computer, as
P
Sync button
Smartphone
P
Synchronizing information—the basics
23