Palm Treo 700P Using Manual page 217

Synchronizing over an infrared connection
When you synchronize using your smartphone's IR port, you don't need
your cable. This is especially useful if you travel with an IR-enabled
laptop.
WINDOWS ONLY
0
1. On your computer, click the HotSync manager icon
taskbar in the lower-right corner of your screen. Make sure that
Infrared is selected.
2. On your smartphone, go to Applications
HotSync .
3. Select Local.
4. Select the pick list below the HotSync icon and select IR to a PC/
Handheld.
5. Position the IR port of your smartphone within a few inches of the
IR port of your computer.
6. Select the HotSync icon
Using Your Treo 700
on your smartphone.
Smartphone
P
in the
and select
Beaming information
[ ]
!
Before You Begin
Your computer must
include the following
items:
• An enabled IR port
and driver or have an
IR device attached to it.
Check your computer's
documentation to see
if it supports IR
communication.
• HotSync Manager
must be active. On a
Windows computer,
you know HotSync
manager is active
when its icon appears
in the lower-right
corner of your screen.
211