Table of Contents
Advertisement
Care and Maintenance
Cleaning the Harness Adjuster
WARNING!
sure it is clean and free of food, coins, dirt, and other objects.
If debris is present, it must be removed to prevent interference with
the adjuster mechanism.
•
BRUSH AWAY LOOSE DEBRIS, using a soft bristled brush.
•
SPONGE CLEAN, using warm water and mild soap.
•
TOWEL DRY
•
DO NOT:
harness.
Buckle
Removal:
1.
With restraint removed from the base, pull cover and foam back
so that the buckle slots are visible.
2.
Locate metal buckle strap retainer on the top side of the restraint.
3.
Pull retainer up to loosen.
4.
Turn the retainer so that the short side will go down through the
slot in the restraint shell to the bottom side of the restraint.
5.
From the bottom of the restraint, turn the retainer so the short side
will go up through the slot in the restraint shell to the top side of
the restraint.
6.
Thread the retainer through the hole in cover and belly pad to
remove buckle from restraint.
7.
Continue to push retainer back through the slot in the cover.
32
Periodically check the adjuster area to be
Use solvents, abrasive cleaners, or disassemble the
Advertisement
Table of Contents
