Table of Contents
Advertisement
Using the Restraint
Harness Buckle
To Unfasten Buckle (Fig A):
•
Brace the rear of the buckle with hand.
•
Use thumb to press release button until tongues
are ejected from buckle.
To Fasten Buckle (Fig B):
•
Hold the buckle with one hand.
•
Use the other hand to insert one tongue at
a time into the buckle. Proper connection is
confirmed with a positive click after inserting
the second buckle tongue.
IMPORTANT: Periodically clean the buckle to
ensure proper operation. See section, Cleaning
the Buckle, on page 33.
Re-Routing Buckle Position
Your infant carrier has been assembled with
the buckle strap in the inner position for infants
weighing less than 11 lbs. (5 kg.). Once your
child reaches 11 lbs. (5 kg.) re-route the buckle
position to the outer position for the remainder
of use with that child. Figure C shows both
harness buckle position slots.
Remove Buckle
1.
With restraint removed from the base, pull
seat cover and foam back so the buckle slots
are visible.
10
A
B
Inner Slot
Outer Slot
C
D
Advertisement
Table of Contents
