Britax COMPANION User Manual page 19

Hide thumbs Also See for COMPANION:
Table of Contents

Advertisement

8.
Slowly pull the adjuster strap to tighten
the harness around the child (Fig. F).
Snugly adjust the belts provided with this
child restraint around your child. A snug
strap should not allow any slack. It lies in
a relatively straight line without sagging.
It does not press on the child's flesh or
push the child's body into an unnatural
position.
9.
Position the chest clip at the center of
the child's chest, level with the child's
armpits.
10.
Verify that harness is not twisted and
child is properly secured.
11.
Make sure that harness height and
buckle position is correct. Refer to
Checking Harness Height on page 14
for instructions.
IMPORTANT
:
Always pull on the harness after securing
the child to make sure the buckle and
harness are locked. If not, the buckle
or adjuster area may be clogged with
food, drink, or objects that need to
be removed. See pages 31 and 33 for
cleaning instructions.
Always make sure that the harness
is tight before each use, or after any
adjustments.
Using the Restraint
D
E
F
17

Advertisement

Table of Contents
loading

Table of Contents