Table of Contents
Advertisement
2.
Locate metal retainer attached to the opposite
end of the buckle strap from the buckle on
the top side of the restraint.
3.
Pull retainer up to loosen (Fig D).
4.
Turn the retainer so that the short side will go
down through the slot in the restraint shell to
the bottom side of the restraint (Fig. E).
5.
From the bottom of the restraint, turn the
retainer so the short side will go up through
the slot in the restraint shell to the top side of
the restraint (Fig. F).
6.
Continue to push retainer back through the
slot in the cover.
Replace Buckle
7.
Turn the retainer so that the short side will go
down through the desired cover slot and the
slot in the restraint shell to the bottom side of
the restraint (Fig. G).
8.
From the back side of the restraint, turn retainer
so that the short side will go up through the
other slot in the restraint shell (do not insert
through cover) to the top side of the restraint.
9.
Pull buckle away from restraint until tight,
then verify that the strap is not twisted and
the release button is facing outward (Fig H).
10.
Replace cover.
Using the Restraint
E
F
G
H
11
Advertisement
Table of Contents
