Icon Process Controls ProCon DO3000-C Series Quick Start Manual page 2

ProCon — DO3000-C Series
®
Dissolved Oxygen Controller
Safety Information
■ DO NOT exceed maximum temperature or pressure specifications
■ ALWAYS wear safety goggles or face-shield during installation and/or service
■ DO NOT alter product construction
Warning | Caution | Danger
Indicates a potential hazard. Failure to follow all warnings
may lead to equipment damage, or failure, injury, or death.
Intended Use
When receiving the instrument, please open the package carefully, check whether the instrument and accessories are
damaged by transportation and whether the accessories are complete. If any abnormalities are found, please contact our
after-sales service department or regional customer service center, and keep the package for return processing.
The technical data listed in the current data sheet are engaging and must be complied with. If the data sheet is not available,
please order or download it from our homepage (www.iconprocon.com).
Personnel for Installation, Commissioning, and Operation
This instrument is an analytical measurement and control instrument with highly precision. Only skilled,trained or authorized
person should carry out installation, setup and operation of the instrument. Ensure that the power cable is physically
separated from the power supply when connection or repair. Once the safety problem occurs, make sure that the power to the
instrument is off and disconnected.
For example, it may insecurity when the following situations occur:
1. Apparent damage to the analyzer
2. The analyzer does not work properly or provides specified measurements.
3. The analyzer has been stored for a long time in an environment where the temperature exceeds 70 °C.
The analyzer must be installed by professionals in accordance with relevant local specifications, and instructions are included in
the operation manual.
Comply with the technical specifications and input requirements of the analyzer.
Product Description
The DO3000 Dissolved Oxygen sensor uses fluorescence quenching technology to convert optical signals into electrical signals.
It delivers stable oxygen concentration readings with a self-developed 3D algorithm.
The Dissolved Oxygen Controller is a microprocessor-based water quality online monitoring control instrument. It is widely used
in drinking water treatment plants, drinking water distribution networks, swimming pools, water treatment projects, sewage
treatment, water disinfection and other industrial processes.
25-0671 © Icon Process Controls Ltd.
Note | Technical Notes
Highlights additional information or detailed procedure.
2