Advertisement
Chapter 3 – Using the Front Panel
Caller ID Options
Press the
and Enter buttons to enable formatted (FCID) or unformatted (UCID) Caller ID or to
disable Caller ID altogether. Same as the +VCID=0, +VCID=1, and +VCID=2 commands.
Note:
Because Caller ID information is sent between the first and second ring, register S0 must be
set to 2 or more rings for the modem to receive Caller ID information.
Region Select Options
Note: See page 10.
Multi-Tech Systems, Inc. MT5600BA-V92 User Guide
28
Downloaded from
Elcodis.com
electronic components distributor
Advertisement
Need help?
Do you have a question about the MultiModem II MT5600BA-V92-NAM and is the answer not in the manual?
Questions and answers