RTS KP-12 System Installation Manual page 17

MCII-e Factory set DIP Switch Settings
TABLE 2.
DIP Switch 1
DIP Switch 2
DIP Switch 3, 4, and 5
DIP Switch 6
DIP Switch 7
DIP Switch 8
WARNING: DIP Switches 1, 6, and 8 should always be left in the OPEN position. These are reserved for debugging and can have unintended consequences if not left in the
OPEN position.
Relationship between Audio Input/Output Cards, Intercom Ports, and Logical Keypanel Numbers
TABLE 3.
Logical
Keypanel AIO AIO AIO
Number 1 2
1 1 9
2 2 10
3 3 11
4 4 12
5 5 13
6 6 14
7 7 15
8 8 16
NOTE: For AIO-16 cards, see the AIO-16 User Manual (p/n 9350-7726-000).
Debug Only! Must be in OPEN position.
Sets the baud rate for AZedit serial connection via J1.
By default, AZedit is set for COM1 and 38,400 kbps (38.4k). The baud rate set in AZedit must
match the baud rate setting of the Master Controllers in ADAM.
Default: OPEN
OPEN: 9600 baud
CLOSED: 38.4k baud
Reserved, keep in OPEN position.
Debug Only! Must be in OPEN position.
Determines the Master / Slave Frame in a multi-frame system
Default: CLOSED
OPEN: Slave Frame
CLOSED: Master Frame
Debug Only! Must be in OPEN position.
Intercom Port Numbers, Grouped by Audio I/O Card Numbers
AIO AIO AIO AIO
3 4 5 6
17 25 33 41
18 26 34 42
19 27 35 43
20 28 36 44
21 29 37 45
22 30 38 46
23 31 39 47
24 32 40 48
AIO AIO AIO AIO
7 8 9 10
49 57 65 73
50 58 66 74
51 59 67 75
52 60 68 76
53 61 69 77
54 62 70 78
55 63 71 79
56 64 72 80
AIO AIO AIO AIO
11 12 13 14
81 89 97 105
82 90 98 106
83 91 99 107
84 92 100 108
85 93 101 109
86 94 102 110
87 95 103 111
88 96 104 112
AIO AIO
15 16 17
113 121 129
114 122 130
115 123 131
116 124 132
117 125 133
118 126 134
119 127 135
120 128 136
13