Texas Instruments Voyage 200 User Manual page 916

520 Invalid outside Custom..EndCustm or ToolBar..EndTbar blocks
530 Invalid outside Dialog..EndDlog, Custom..EndCustm, or
ToolBar..EndTBar blocks
540 Invalid outside Dialog..EndDlog block
550 Invalid outside function or program
560 Invalid outside Loop..EndLoop, For..EndFor, or While..EndWhile blocks
570 Invalid pathname
575 Invalid polar complex
580 Invalid program reference
585 Invalid relocation data in ASM program
590 Invalid syntax block
600 Invalid table
605 Invalid use of units
610 Invalid variable name in a Local statement
620 Invalid variable or function name
630 Invalid variable reference
640 Invalid vector syntax
650 Link transmission
665 Matrix not diagonalizable
Appendix B: Technical Reference
For example, an Item command is attempted outside a Custom or
ToolBar structure.
For example, a Title command is attempted outside a Dialog,
Custom, or ToolBar structure.
For example, the DropDown command is attempted outside a
Dialog structure.
A number of commands are not valid outside a program or a
function. For example, Local cannot be used unless it is in a program
or function.
For example, the Exit command is valid only inside these loop
blocks.
For example, \\var is invalid.
Programs cannot be referenced within functions or expressions such
as 1+p(x) where p is a program.
The necessary relocation data in the ASM (Assembly) program is
missing or corrupted.
A Dialog..EndDlog block is empty or has more than one title. A
Custom..EndCustm block cannot contain PIC variables, and items
must be preceded by a title. A Toolbar..EndTBar block must have a
second argument if no items follow; or items must have a second
argument and must be preceded by a title.
A transmission between two units was not completed. Verify that the
connecting cable is connected firmly to both units.
910