Copying Or Moving Variables From One Folder To Another; Locking Or Unlocking Variables Folders, Or Flash Applications - Texas Instruments Voyage 200 User Manual

Copying or Moving Variables from One Folder to Another

Copying or Moving Variables from One Folder to Another Copying or Moving Variables from One Folder to Another Copying or Moving Variables from One Folder to Another
You must have at least one folder other than
variables within the same folder.
1. On , select the variables.
VAR-LINK
2. Press ƒ
Manage
3. Select the destination folder.
4. Press ¸. The copied or moved variables retain their original names.
To copy a variable to a different name in the same folder, use 9 (such as
Note:
a1!a2) or the CopyVar command from the Home screen.

Locking or Unlocking Variables Folders, or Flash Applications

Locking or Unlocking Variables Folders, or Flash Applications
Locking or Unlocking Variables Folders, or Flash Applications Locking or Unlocking Variables Folders, or Flash Applications
When a variable is locked, you cannot delete, rename, or store to it. However, you can
copy, move, or display its contents. When a folder is locked, you can manipulate the
variables in the folder (assuming the variables are not locked), but you cannot delete the
folder. When a Flash application is locked, you cannot delete it.
1. On , select the variables, folders, or Flash application.
VAR-LINK
Memory and Variable Management
and select
2:Copy
. You cannot use
MAIN
or .
4:Move
to copy
VAR-LINK
702