Executing A Command; Splitting The Text Editor/Home Screen - Texas Instruments Voyage 200 User Manual

Executing a Command

Executing a Command Executing a Command Executing a Command
To execute a command, you must first mark the line with a
not marked with
C
1. Place the cursor anywhere on the command line.
2. Press †.
The command is copied to the entry line on the Home screen and executed. The Home
screen is displayed temporarily during execution, and then the Text Editor is redisplayed.
After execution, the cursor moves to the next line in the script so that you can continue to
execute a series of commands.
To examine the result on the Home screen, use a split screen or press
Note:
H ¹ "
Splitting the Text Editor/ Home Screen Splitting the Text Editor/ Home Screen
Splitting the Text Editor/ Home Screen Splitting the Text Editor/ Home Screen
With a split screen, you can view your command script and see the result of an executed
command at the same time.
To:
Split the screen
Return to a full screen
Text Editor
Text Editor
, it will be ignored.
Press:
...
and select
1:Script view.
...
and select
2:Clear split.
. If you execute a line that is
C
662