Texas Instruments Voyage 200 User Manual page 547

Calc Type Description
PowerReg Power regression — Fits the data to the model equation
y=ax
and ln(y).
QuadReg Quadratic regression — Fits the data to the second-order
polynomial y=ax
points.
•
•
QuartReg Quartic regression — Fits the data to the fourth-order
polynomial y=ax
five data points.
•
•
SinReg Sinusoidal regression — Calculates the sinusoidal
regression and updates all the system statistics variables.
The output is always in radians, regardless of the angle
mode setting.
For and all regression calculations, the columns that you specify for x and y
Note: TwoVar
(and optionally, Freq or Category) must have the same length.
From the Home Screen or a Program From the Home Screen or a Program From the Home Screen or a Program From the Home Screen or a Program
Use the applicable command for the calculation that you want to perform. The
commands have the same name as the corresponding Calculation Type. Refer to the
Technical Reference module for information about each command.
Statistics and Data Plots
b
using a least-squares fit and transformed values ln(x)
2
+bx+c. You must have at least three data
For three points, the equation is a polynomial fit.
For four or more points, it is a polynomial regression.
4 3
+bx +cx
For five points, the equation is a polynomial fit.
For six or more points, it is a polynomial regression.
2
+ dx+e. You must have at least
547