Table of Contents
Advertisement
Plots defined with column numbers always use the last data variable in the
Note:
Data/Matrix Editor, even if that variable was not used to create the definition.
To:
Edit a plot definition
Select or deselect a plot
Turn all plots and/or
functions off
You can not use H ˆ to set a plot's display style. However, the plot definition
Note:
lets you select the mark used for the plot.
To Graph Plots and Y= Functions
To Graph Plots and Y= Functions
To Graph Plots and Y= Functions
To Graph Plots and Y= Functions
As necessary, you can select and graph stat plots and
Graphing and Tracing a Defined Stat Plot
Graphing and Tracing a Defined Stat Plot
Graphing and Tracing a Defined Stat Plot
Graphing and Tracing a Defined Stat Plot
After entering the data points and defining the stat plots, you can graph the selected
plots by using the same methods you used to graph a function from the Y= Editor (as
described in Basic Function Graphing).
Statistics and Data Plots
Do this:
Highlight the plot and press
same definition screen that is displayed in the
Data/Matrix Editor.
Highlight the plot and press
‡
Press
and select the applicable item. You
can also use this menu to turn all functions on.
...
. You will see the
†
.
functions at the same time.
y(x)
560
Advertisement
Table of Contents
