Texas Instruments Voyage 200 User Manual page 458

1. Use D and C to highlight the value or setting to change.
2. Specify the new value or setting.
To change:
tblStart
or
@ tbl
Graph < - > Table
or
Independent
To cancel a menu or exit the dialog box without saving any changes, press
Note:
N instead of ¸.
3. After changing all applicable values or settings, press ¸ to save your changes
and close the dialog box.
From the Home Screen or a Program From the Home Screen or a Program From the Home Screen or a Program From the Home Screen or a Program
You can set up a table's parameters from the Home screen or a program. You can:
• Store values directly to the system variables
Recalling Variable Values" in Operating the Calculator.
Tables
Do this:
Type the new value. The existing value is
erased when you start to type.
— or —
A B
Press or to remove the highlighting.
Then edit the existing value.
A B
Press or to display a menu of valid
settings. Then either:
• Move the cursor to highlight the setting and
¸
press .
— or —
• Press the number for that setting.
and @ . Refer to "Storing and
tblStart tbl
458