Table of Contents
Advertisement
The available application choices are those listed when you press B from the Page 2
mode screen or when you press O. You must have different applications in each
screen unless you are in 2-graph mode.
Number of Graphs
Specifies whether both parts of a split screen can display graphs at the same time.
1
2
Graph 2
Specifies the type of graphs that you can plot for the second graph on a two-graph split
screen. This is active only when Number of Graphs = 2. In this two-graph setting, Graph
sets the type of graph for the top or left part of the split screen, and Graph 2 sets the
bottom or right part. The available choices are the same as for Graph.
Split Screen Ratio (Voyage 200 only)
Specifies the proportional sizes of the two parts of a split screen.
1:1
1:2
2:1
Exact/Approx
Specifies how fractional and symbolic expressions are calculated and displayed. By
retaining rational and symbolic forms in the EXACT setting, the TI-89
Titanium / Voyage™ 200 increases precision by eliminating most numeric rounding
errors.
1:AUTO
2:EXACT
3:APPROXIMATE Displays numeric results in floating-point form.
Note: For a complete description of these settings, refer to "Formats of Displayed
Results" in the Operating the Calculator module.
Appendix B: Technical Reference
Only one part can display graphs.
Both parts can display an independent graph
screen (Graph or Graph 2 setting) with
independent settings.
The screen is split evenly.
The bottom or right part is approximately twice
the size of the top or left part.
The top or left part is approximately twice the
size of the bottom or right part.
Uses EXACT setting in most cases. However,
uses APPROXIMATE if the entry contains a
decimal point.
Displays non-whole-number results in their
rational or symbolic form.
916
Advertisement
Table of Contents
