1. Manuals
  2. Brands
  3. Egholm Manuals
  4. Utility Vehicle
  5. City Ranger 3070
  6. Operating manual

Egholm City Ranger 3070 Operating Manual

Salt and sand spreader. snow removal attachment
Hide thumbs Also See for City Ranger 3070:
Table of Contents

Advertisement

Quick Links

Download this manual
Read this manual prior to performing any task!
30SGAA
Operating Manual
Egholm Salt and sand spreader
Snow removal attachment for City Ranger 3070
EN
Keep for future reference!

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the City Ranger 3070 and is the answer not in the manual?

Questions and answers

Related Manuals for Egholm City Ranger 3070

Summary of Contents for Egholm City Ranger 3070

  • Page 1 Read this manual prior to performing any task! 30SGAA Operating Manual Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 Keep for future reference!
  • Page 2 Egholm A/S Transportvej 27 DK-7620 Lemvig DENMARK Telephone:  +45 97 81 12 05 Fax:  +45 97 81 12 10 E-mail:  info@egholm.dk Internet:  www.egholm.eu Original document © 2024 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...
  • Page 3 Manufacturer and editor Egholm A/S Transportvej 27 7620 Lemvig DENMARK Phone: +45 97 81 12 05 Fax: +45 97 81 12 10 E-mail: info@egholm.dk 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...
  • Page 4 To achieve the best and safest product possible, Egholm is always interested in feedback from the field. Please report any incidents with Egholm Salt and sand spreader, specifically safety-related incidents, such as accidents, to Egholm. Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...

  • Page 5: Table Of Contents

    ......... Personal protective equipment ..........Signage ..................... 2.10 Modifications and spare parts ........... Transport inspection and unpacking ........How to attach and detach ............Preparing attaching ................. 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...
  • Page 6 Contacting Egholm service ............Safety during service ..............Overview of maintenance tasks ..........Cleaning ....................Lubricating ..................... Replacing wearing parts ..............Transporting Egholm Salt and sand spreader ....Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...
  • Page 7   Table of contents   Storing Egholm Salt and sand spreader ......Short-term storage ................Seasonal storage ................Decommissioning and disposal ..........Technical data ..................Index ......................2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...

  • Page 8: Overview

    City Ranger 3070 basic machine (   ). The Egholm Salt and Fig. 1 sand spreader is attached at the rear side. It consists of a tank and a spreading unit. Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...
  • Page 9 Simple modifications can be made to optimize the setup of the Egholm Salt and sand spreader for the designated grit. In that way, grit leakage of very fine grains or the wear caused by abrasive grit, such as gravel, can be minimized.

  • Page 10: Components And Assemblies

    Forklift lifting point Lid lock Warning lights (option) Spreading unit Grit container cover Rear work light (option) Beacon light (option) Locking point for lifted spreading unit Grit container cover Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...
  • Page 11   Overview Components and assemblies  Egholm Salt and sand spreader is delivered with a rain cover for the grit container lid (   ) to protect the grit material from rain and snow. Fig. 2 Egholm recommends using the rain cover in any weather.
  • Page 12 Components and assemblies  Grit container Fig. 4 Overview grit container Front cover Auger Salt stop (optional) Stirrer disk Safety lattice The rain cover is removed for display purposes. Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...
  • Page 13 Hydraulic drive Locking lever Ladder* Joint for lifting *Only usable in lowered position. Maximum load 330.69 lbs (150 kg) Behind the front cover Chains are not depicted. 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...
  • Page 14 Hydraulics and electrical couplings Auger chain sprocket Chain tension pulley Drive sprocket Front cover contact switch Hydraulic drive Stirrer sprocket Clutch (engages and disengages stirrer) Speed sensor Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...

  • Page 15: Overview Of Display Elements

    Fig. 7 Winter attachment overview Pos. Designation Description Egholm Salt and sand spreader Tap to select and deselect. Keep pressed for approx. 2 s to enter spreader adjustment. 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...
  • Page 16 When pressing again, the amount will be reduced to the saved value. This function can be helpful for boosting the grit material output. Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...
  • Page 17 The headline indicates the content of the respective screen. Selected grit material The selected grit material is named here. Specific grit materials can be named individually in the settings. 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...
  • Page 18 Maximum kg/min The value indicates the maximum selectable amount of spreading material per minute. Minimum kg/min The value indicates the minimum selectable amount of spreading material per minute. Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...
  • Page 19 This value is used to adjust the nominal spreading width of 6 m to the measured value. Factory reset Performs a factory reset. The button needs to be pressed for appox. 2 s. 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...

  • Page 20: Safety

    When a passage is marked with the safety alert symbol as displayed on the left, pay special attention to the contents. Information marked with this symbol is safety-related. Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...

  • Page 21: Intended Use Statement

    Ä  “Performance data” on page 92) while being moved and driven by the City Ranger 3070. The spreading material must be approved by the authorities at the place of use. 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...
  • Page 22 Always handle Egholm Salt and sand spreader in a way that leaves  sufficient space to perform all work. Misuse of Egholm Salt and sand spreader can lead to dangerous situa‐ tions and may cause severe property damage. Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...

  • Page 23: Operating Area, Working Area And Danger Zone

    Fig. 10 Work and danger zones Operating zone Temporary danger zone Danger zone approx. 10 ft (3 m) The following areas and zones can be found on Egholm Salt and sand spreader: Operating area (    Fig. 10 Danger area only, while material is spread (  ...

  • Page 24: In Case Of Emergency

    Depending on the nature of the emergency, certain functions of Egholm Salt and sand spreader may become impeded or altered. All emergen‐ cies with an impact on the condition of Egholm Salt and sand spreader, such as accidents, unexpected grave malfunction, lightning strike or fire, put the safety of Egholm Salt and sand spreader at stake.

  • Page 25: Residual Risks

    Ranger 3070 or for operating Egholm Salt and sand spreader. Otherwise, switch off the engine. When any work is performed on Egholm Salt and sand spreader while the engine of City Ranger 3070 is running, there is a danger of grave injuries due to moving components. 2024-10-24...
  • Page 26 When Egholm Salt and sand spreader is attached, the center of gravity of City Ranger 3070 is elevated. If the grit container is full, it is elevated even further. When taking curves, the risk of falling over is increased with an elevated center of gravity.
  • Page 27 The surfaces of components (e.g., hydraulic components) can heat up significantly during operation. Skin contact with hot surfaces or liquids can cause severe burns to the skin. 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...

  • Page 28: Safety Devices

    Ä  “Beacon light (optional)” on page 28) signals ope‐ ration of Egholm Salt and sand spreader to others. Especially when operating in poor light conditions, the beacon light increases visibility. Fig. 11 Beacon light Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...

  • Page 29: Skills And Personnel Requirements

    Egholm Salt and sand spreader. If Egholm Salt and sand spreader is to be operated on public roads, the operator must meet the legal requirements at the place of use.
  • Page 30 The characteristics and skills of the operator as described above allow the operator to safely fulfill the following tasks: Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...
  • Page 31 The abilities and properties of service technicians allow them to safely and efficiently carry out the following tasks: 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...

  • Page 32: Personal Protective Equipment

    The following section describes the personal protective equipment rec‐ ommended by the manufacturer. The recommendations are derived from a risk assessment of Egholm Salt and sand spreader and do not take into account the protective equipment required for operating City Ranger 3070.

  • Page 33: Signage

    This includes keeping the signage clean and avoiding covering the signs with other signs and/or paint. Replace illegible signage immediately. Replacements can be ordered at Egholm Partners. 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...
  • Page 34 Only work on an inactive spreading disk! Lifting point This sign indicates a lifting point where lifting equipment can be attached or forklifts can be inserted. Fig. 15 Lifting point Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...

  • Page 35: Modifications And Spare Parts

    For that reason, it is important to contact Egholm whenever modifications are planned. Please be aware that unauthorized modifications can only be made at your own risk. 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...
  • Page 36 Egholm cannot assess the consequences if you do not inform Egholm about the use. Please be aware that the use of spare parts not approved by Egholm can only be made at your own risk. Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...

  • Page 37: Transport Inspection And Unpacking

    Protective work Safety shoes cian clothes Egholm Salt and sand spreader arrives on a pallet and is wrapped in foil Fig. 17 If during the unpacking any damage is identified, please con‐ tact Egholm service ( Ä  Chapter 6.1 “Contacting Egholm service”...

  • Page 38: How To Attach And Detach

    If using split or gravel ( Ä  “If using split or gravel” on page 43)  If using salt or sand ( Ä  “If using salt or sand” on page 46)  Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...
  • Page 39 Operator Protective work Safety shoes Protective clothes gloves Make sure that the engine of City Ranger 3070 is turned off and that it is set to parking position. Unlock the lever locks (   ) on both sides: Fig. 18 Fig. 18...
  • Page 40 8 o'clock position when pulled out and tilted   Fig. 21 Make sure that the engine of City Ranger 3070 is turned off and that it is set to parking position. On City Ranger 3070: Carefully push down the flap covering the B-frame connectors.
  • Page 41 8 o'clock position when pulled out and tilted   Fig. 26 Make sure that the engine of City Ranger 3070 is turned off and that it is set to parking position. City Ranger 3070 must be parked on a level surface.
  • Page 42  You can pick up and attach Egholm Salt and sand spreader Fig. 30 Cleaning B-frame connectors using a forklift ( Ä  “Attaching using forklift” on page 54). Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...
  • Page 43 Safety shoes Protective cian clothes gloves Make sure that the engine of City Ranger 3070 is turned off and that it is set to parking position. Make sure that the spreading unit is lowered Ä  “Lowering the spreading unit” on page 71.
  • Page 44 If the slide guide is in position for salt and sand ( /A): Lift Fig. 32 locking lever (   ) and move it to position B. Fig. 32 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...
  • Page 45 Make sure that the locking lever is pushed down and fully engaged in the position for split or gravel ( /B). Fig. 32  Egholm Salt and sand spreader has been adjusted for split or gravel. 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...
  • Page 46 When working near the auger while Egholm Salt and sand spreader is attached to City Ranger 3070, accidents due to moving parts can be the result. Have a second person assist you while removing the safety lattice.
  • Page 47  The holding brackets can be removed. Remove the holding brackets and safely store them. Lift the safety lattice off the grit container and safely store it. 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...
  • Page 48 Fix the salt stop using 2 fixing nuts (   Fig. 36  The salt stop is in place and fixed. Fine grit material will no longer flow out freely. Re-attach the safety lattice. Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...
  • Page 49 Make sure that the locking lever is pushed down and fully engaged in the position for salt and sand ( /A). Fig. 37  Egholm Salt and sand spreader has been adjusted for salt and sand. 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...

  • Page 50: Attaching

    Egholm Salt and sand spreader and City Ranger 3070 must measure at least 1 in (approx. 25 mm). Make sure that the engine of City Ranger 3070 is turned off and that it is set to parking position. City Ranger 3070 must be parked on a level surface.
  • Page 51  Egholm Salt and sand spreader sits straight over the guiding rails and the grooves in the machine bed are aligned with the bolts in the rails. 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...
  • Page 52 Egholm Salt and sand spreader is locked in place but the stand is still partly connected. The lifting arms must be cranked down further until the stand can be retracted. Fig. 41 Engaged holding hook Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...
  • Page 53 Fig. 42 Retracting position Attach the front cover ( Ä  “Attaching front cover” on page 56).  The attachment using the stand is completed. 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...
  • Page 54 Ä  “Weights” on page 92 and grit combined. The grit weight depends on the used material. Make sure that the engine of City Ranger 3070 is turned off and that it is set to parking position. City Ranger 3070 must be parked on a level surface.
  • Page 55 Pull out the locking lever (   .) and turn it towards the cabin Fig. 45   Fig. 45  The locking lever is tilted fully and pointing in approx. 8 o'clock direction. 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...
  • Page 56 Safety shoes Protective clothes gloves Make sure the engine of City Ranger 3070 is turned off and that it is set to parking position. Fig. 47 Attaching front cover Place the top rear side of the cover on the rail (  ...

  • Page 57: Filling Grit Material

    Protective gog- cian clothes gloves gles Remove the rain cover. Make sure that your grit material is selected according to the specifications Ä  “Performance data” on page 92. 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...

  • Page 58: Preparing Detaching

    Ä  Chapter 5.6 “Emptying grit container” on page 78). Lift the spreading unit ( Ä  “Lifting the spreading unit” on page 70).  The spreading unit is lifted and in position for storing. Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...

  • Page 59: Detaching

    The wheel brakes of the stand must be disengaged for detaching Egholm Salt and sand spreader Make sure that the engine of City Ranger 3070 is turned off and that it is set to parking position. City Ranger 3070 must be parked on a level surface.
  • Page 60 ) down and slide the Fig. 53 bolt (   ) into the groove (   Fig. 53 Fig. 53 Switch the ratchet to lifting ( /A). Fig. 52 Fig. 53 Moving bolt into groove Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...
  • Page 61 Ä  “Weights” on page 92 and grit combined. The grit weight depends on the material used. Make sure that the engine of City Ranger 3070 is turned off and that it is set to parking position. Remove the front cover ( Ä...
  • Page 62 Carefully and slowly lift Egholm Salt and sand spreader.  Egholm Salt and sand spreader will slowly move towards the rear of City Ranger 3070 until the groove is released from the bolt. Lift Egholm Salt and sand spreader fully and transport it to the designated position for storing.

  • Page 63: Deselecting Egholm Salt And Sand Spreader

    Deselecting Egholm Salt and sand spreader Operator Protective work Safety shoes clothes Make sure that the ignition key of City Ranger 3070 is turned to [Ignition ON]-position. Select the winter attachment overview by pressing the winter attachment icon (   Fig. 56 Fig. 56...

  • Page 64: How To Operate Egholm Salt And Sand Spreader

    Entering values and text To enter a value, press on an input field. Use the screen keypad dis‐ played to enter values. To enter text, use the screen keyboard. Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...
  • Page 65 10 minutes. Call up the winter attachment overview on the display by selecting the snowflake icon (   Fig. 58 Fig. 58 Calling up winter attachment over‐ view 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...
  • Page 66 Press “STOP” to abort. Grit material will be conveyed for 60 s and the bucket is filled. Fig. 62 Auger output Weigh the content of the bucket using the scale. Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...
  • Page 67 Wait until output stops. Weigh the bucket using the precision scale. Enter the weight in the respective field (   Fig. 64 Press “Save” to save the entered value. 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...
  • Page 68 Always ensure compliance with local regulations when spreading grit material. Move City Ranger 3070 to a location, where grit material can be spread at least 20 ft (6 m) wide without causing any harm to persons or property damage.
  • Page 69 4.92 ft (1.5 m) Measure a distance of 4.92 ft (1.5 m) from the center of the spreading disk in 3 directions ( ) and mark this distance. Fig. 65 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...

  • Page 70: Lifting And Lowering The Spreading Unit

    The quantity and spreading width adjustment can be used. 5.2  Lifting and lowering the spreading unit Lifting the spreading unit Have a second person assist you with lifting. Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...
  • Page 71 Protective clothes gloves Make sure that the engine of City Ranger 3070 is turned off and that it is set to parking position. Carefully pull the spreading unit away from the grit container until the snap-in cams slip out of the rubber holder (  ...
  • Page 72 Protective work Safety shoes clothes Make sure that the engine of City Ranger 3070 is turned off and that it is set to parking position. Place one hand on the spreading head and hold it. Lift the locking lever (  ...

  • Page 73: Setting Up Main Spreading Direction

    Protective work Safety shoes Protective clothes gloves Make sure that the engine of City Ranger 3070 is turned off and that it is set to parking position. Adjusting main spreading direction Pull the locking lever (   ) up to unlock the spreading guard Fig. 72...
  • Page 74 You can also activate spreading while driving. On the display, press Fig. 73 Work mode  Spreading is enabled and will start, once City Ranger 3070 is moving. Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...

  • Page 75: Adjusting Spreading Behavior

    Beyond these basic settings and a fine tuning adjustment, Egholm Salt and sand spreader also offers the possibility of boosting the amount of spreading material by doubling the output on key press. 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...
  • Page 76 Double the presently set output by pressing on the display.  The amount of spreading material is doubled. Turning grit material boost off Return to the default amount of spreading material by pressing Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...
  • Page 77 Fig. 79 *The unit is dependent on the settings changed in step 1 and 2.  The bar is selected and can be adjusted. Fig. 79 Adjusting material amount 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...

  • Page 78: Emptying Grit Container

    Operator Protective work Safety shoes clothes Make sure that the engine of City Ranger 3070 is turned off and that it is set to parking position. Make sure that the residual grit material can be dumped at the desired position.

  • Page 79: Deactivating Egholm Salt And Sand Spreader

    Egholm Salt and sand spreader and the front attachment (if used), are stopped. On keypad 1, press the [WM] button (   Fig. 83  Spreading is deactivated. Fig. 83 Work mode button 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...

  • Page 80: How To Service Egholm Salt And Sand Spreader

    Technical support: tst@egholm.de United Kingdom Egholm United Kingdom Navigation Business Village 21 Navigation Way Preston PR2 2YP Web: https://www.egholm.co.uk Phone: +44 (0) 7979 634265 E-mail: info@egholm.co.uk Technical support: tst@egholm.co.uk Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...

  • Page 81: Safety During Service

    Replacement of hydraulic hoses and other parts of the  hydraulics. Performing checks on or replacing safety-related parts.  If Egholm Salt and sand spreader is not properly maintained, dangerous malfunction can occur. 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...
  • Page 82 If performing work on Egholm Salt and sand spreader while it is  attached to City Ranger 3070: Make sure that City Ranger 3070 is parked on firm and level  ground. Make sure that the engine of City Ranger 3070 is turned off ...

  • Page 83: Overview Of Maintenance Tasks

    Ä  Chapter 6.5 “Lubricating” on page 87  Replacing wearing parts Ä  Chapter 6.6 “Replacing wearing parts”  on page 87 6.4  Cleaning Salt and corrosion Fig. 84 Corrosion damage (example) 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...
  • Page 84 Blockages can occur in several places in and on the Sand and Sand Spreader and may be hard to located. Make sure that the engine of City Ranger 3070 is turned off and that it is set to parking position.
  • Page 85 Drive to a location, where a water supply is accessible and where salty and dirty water with grit residues can be spilled. Make sure that the engine of City Ranger 3070 is turned off and that it is set to parking position.
  • Page 86 Make sure that the engine of City Ranger 3070 ist turned off and that it is set to parking position. Make sure that the container has been rinsed Ä...

  • Page 87: Lubricating

    Make sure that the engine of City Ranger 3070 ist turned off and that it is set to parking position. If attached: Remove the front cover ( Ä  “Removing the front cover” on page 39).

  • Page 88: Transporting Egholm Salt And Sand Spreader

    Transporting Egholm Salt and sand spreader Transporting using the stand On an even ground, Egholm Salt and sand spreader can be moved by hand using the stand. Make sure to engage the brakes when the target destination has been reached.

  • Page 89: Storing Egholm Salt And Sand Spreader

    Egholm recommends to cover Egholm Salt and sand spreader to shield it from rain or snow. If not using the stand, always store Egholm Salt and sand spreader on a stable pallet and avoid storing it directly on the floor.

  • Page 90: Decommissioning And Disposal

    Clean all residues of grit material or dirt from all parts. Conserve bare metal parts, such as hydraulic cylinders, with a suitable product. Cover Egholm Salt and sand spreader to avoid harmful environ‐ mental impact. Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...
  • Page 91 The disposal specialist may need information contained in this manual to properly perform an environmentally safe disposal. Contact a disposal specialist to perform disposal. 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...

  • Page 92: Technical Data

     Never use material that potentially contains parts than can result  in environmental damage. If potentially harmful grit material is used, grave environmental damage can occur. Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...
  • Page 93 The sound emission of Egholm Salt and sand spreader depends on the grit material used. Hard grit material, such as gravel, can result in sound emission exceeding 85 dB(A). 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...

  • Page 94: Index

    ......15 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070 2024-10-24...
  • Page 95 ....70 groups of personnel ....29 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...
  • Page 96 ......32 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...
  • Page 97 ......23 2024-10-24 Egholm Salt and sand spreader Snow removal attachment for City Ranger 3070...

Table of Contents