Egholm City Ranger 3070 Operator's Manual
Snow sweeper
Hide thumbs
Also See for City Ranger 3070:
- Operating manual (97 pages) ,
- Operator's manual (76 pages) ,
- Operator's manual (24 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Egholm City Ranger 3070
Summary of Contents for Egholm City Ranger 3070
- Page 1 Operator´s manual Snow sweeper City Ranger 3070...
- Page 2 Introduction Dear Customer Congratulations with your Egholm product The City Ranger 3070 is a Danish designed and manufactured product, which offers a very flexible way of maintaining outdoor areas. Optimal use of your City Ranger 3070 Snow sweeper To ensure the optimal performance of your City Ranger 3070 snow sweeper, please read this operator’s manual carefully before starting to use the machine.
-
Page 3: Table Of Contents
Notes ..................23 With the snow sweeper fitted to the front of the Useful tips City Ranger 3070 and salt and sand spreader Make sure the snap couplings are clean before fitted on the back, the machine sweeps snow attaching, as this protects the hydraulic system. -
Page 4: General Information
General information... -
Page 5: Safety
Do not drive along slopes with an inclination of more than 5°. (Picture 3) Joystick Max.5° Do not drive along slopes with an inclination of more than 5° Operator’s Manual City Ranger 3070 Snow sweeper... - Page 6 Avoid eye injuries Wear eye protection. Destruction of the hydraulic hoses by pinching or rubbing against the structural parts When connecting the hydraulic hoses, make sure their installation is kink and abrasion free. Operator’s Manual City Ranger 3070 Snow sweeper...
- Page 7 Regularly check the hydraulic hoses for leaks. They must be replaced at regular intervals, even if no defects are present (See the Section 3.1 Service and Maintenance chart in the Operator´s manual for the City Ranger 3070 Basic machine). Operator’s Manual City Ranger 3070 Snow sweeper...
-
Page 8: Ec Declaration Of Conformity
Unless otherwise agreed in writing between the operator, customer and Egholm, Egholm is the Unless otherwise agreed in writing between the operator, customer and Egholm, Egholm is the... -
Page 9: Technical Data
Sweeping capacity approx ......21.900 m /hour Optional equipment Brush guard E56000401. Specifications may changed without prior notice. Operator’s Manual City Ranger 3070 Snow sweeper... -
Page 10: Operator's Manual
Operator´s manual... -
Page 11: Assembly/Disassembly
The Snow sweeper lifting point is an eye directly behind the brush. The lifting eye is marked with a sticker. (Picture 3) Use a crane or forklift to lift the snow brush from the pallet. Unscrew the screws Lifting point Operator’s Manual City Ranger 3070 Snow sweeper... - Page 12 The locking handle may only be engaged when the machine has been stopped and engine switched off. 6. Connect the hydraulic quick couplings by turning the handle to locking position. (Picture 4) Locking the attachment Handle in locked position. Operator’s Manual City Ranger 3070 Snow sweeper...
- Page 13 (Picture 1) c) Tighten the handle. Loosen handle Remember to do it on both stands. (Picture 2) Disassembly Follow the procedure for fitting in the reverse order. Stand in top position Operator’s Manual City Ranger 3070 Snow sweeper...
-
Page 14: Before Start-Up
1. Start the machine. (See Basic machine manual) 2. Choose the winter menu on the display. (Picture 2) Choose winter menu 3. Choose the Snow sweeper in the winter menu. (Picture 3) Choose Snow sweeper Operator’s Manual City Ranger 3070 Snow sweeper... - Page 15 (Picture 4, d) e) Lifting the brush automatically when reversing (Option). If button (Picture 4, e), is activated (lighted) the brush is lifted from the ground when the CR3070 is in reverse. a b c Operator’s Manual City Ranger 3070 Snow sweeper...
- Page 16 When turning, the rear of the machine swings out, so there is a risk of crushing or collision. To increase the lifetime of the brushes, Egholm recommends to work with as little brush pressure as possible.
-
Page 17: Service And Maintenance
Service and maintenance... - Page 18 6. Refit the flange. New brush rings can be ordered from an authorised Egholm distributor. Brush ring Spacer ring Greasing/Lubrication The snow brush has four Lubrication nipples, two on each side. (Picture 4) Lubrication nipple Operator’s Manual City Ranger 3070 Snow sweeper...
- Page 19 It is recommended that the attachment is greased or sprayed with protective lubricant. Never leave the Snow sweeper on the ground without using the stand. The brushes will be damaged. Operator’s Manual City Ranger 3070 Snow sweeper...
-
Page 20: Conditions
Conditions... -
Page 21: Warranty
The warranty period for the materials and manufacture of the snow sweeper is 12 months from the date of purchase. In case of errors or defects on the machine within the warranty period, Egholm will carry out the necessary repairs at no charge to the customer, including materials and working hours, in accordance with the terms and conditions listed below. -
Page 22: Complaints
2. Remove all plastic and rubber parts and dispose of. 3. After the parts mentioned have been removed, the machine is ready to be handed over to an approved scrap merchant. Operator’s Manual City Ranger 3070 Snow sweeper Operator’s Manual City Ranger 3070 Snow sweeper... -
Page 23: Notes
Notes Operator’s Manual City Ranger 3070 Snow sweeper... - Page 24 Egholm A/S Transportvej 27 7620 Lemvig, Denmark T.: +45 97 81 12 05 www.egholm.eu - info@egholm.dk...
Need help?
Do you have a question about the City Ranger 3070 and is the answer not in the manual?
Questions and answers