Page 1
Operator´s manual Snow Plough City Ranger 2260/2250...
Page 2
Reservations As it is the Egholm policy to make continuous improvements, we reserve the right to alter the specifications and equipment at any time without notice. Nlfisk Outdoor accepts no liability for errors or omissions in the operator's manual.
Do not drive on slopes with an incline of more than 10°. (Picture 3) Max. 10° Do not drive on slopes with an incline of more than 10° Operator’s Manual City Ranger 2260/2250 Snow Plough...
Unless otherwise agreed in writing between the operator, customer and Egholm, Egholm is the data originator (data originator) of all data generated by the machine and attachments during use.
Adjuster discs per skid ........... . . 8 Attention Specifications may be changed without prior notice Operator’s Manual City Ranger 2260/2250 Snow Plough...
5. Lock the snow plough in place with the locking handle on the A-frame. (Picture 3) The locking handle can only be engaged when the machine has been stopped. Disassembly Attaching Follow the procedure for fitting in reverse order. Locking Operator’s Manual City Ranger 2260/2250 Snow Plough...
(Picture 4) The snow plough will now adjust to ground conditions. To adjust the weight distribution read the operator's manual for the basic City Ranger 2260/2250 machine. 4. Turn the snow plough by moving the joystick to the left or to the right.
(the same number on both skids). (Picture 3) 5. Fit the skid and put the remaining adjuster discs on the skid above the scraper guard. 6. Put the locking ring back on the skid. Operator’s Manual City Ranger 2260/2250 Snow Plough...
Page 13
3. Remove the nuts and bolts holding the scraper edge and remove the scraper edge. (Picture 3) 4. Fit the new scraper edge by reversing the procedure. New scraper edges and skids can be ordered from an authorised Egholm distributor. Operator’s Manual City Ranger 2260/2250 Snow Plough...
Page 14
When the snow plough is to be stored outside the season, it is recommended to remove any loose paint and to repaint any damaged areas. It is recommended the equipment is greased / sprayed with protective lubricant. Operator’s Manual City Ranger 2260/2250 Snow Plough...
The warranty period for the materials and manufacture of this snow plough is 12 months from the date of purchase. In case of errors or defects on the machine within the warranty period, Egholm will carry out the necessary repairs at no charge to the customer, including materials and working hours, in accordance with the terms and conditions listed below.
1. Used hydraulic oil is to be disposed of at an approved waste disposal facility or site. 2. Remove all plastic and rubber parts and dispose of. 3. After the parts mentioned have been removed, the machine is ready to be handed over to an approved scrap merchant. Operator’s Manual City Ranger 2260/2250 Snow Plough...
Need help?
Do you have a question about the 2260 and is the answer not in the manual?
Questions and answers