Advertisement
Quick Links
REAR WINDOW MOLLE
24+ LAND CRUISER LC 250
MPT4-01
TOOLS
REQUIRED
- Trim pry tool
- 4mm Allen head
- 10mm socket
WARNINGS/CAUTIONS BEFORE STARTING INSTALLATION
Before you install this kit —
instructions, warnings, cautions, and notes contained in
this installation instruction guide. Consult your vehicle
owner's manual for proper disconnection of electrical and
lifting of vehicle if required for installation of this product.
This install may require some technical skills and
knowledge of basic mechanical work. If you do not feel that
you are capable of performing this install please take this
product to a trained professional.
After reading this guide please contact us with any
questions or concerns before installing product.
Customer Service: 855-680-9595
DV8 Offroad is not responsible for any bodily injury or harm to you
or your vehicle as a result of an improper install.
555 E Queen Creek Rd
Bldg A
Chandler, AZ 85286
WWW.DV8OFFROAD.COM
SKILL
LEVEL
- Novice/Intermediate
- 1 (you) to 2 persons
Little skill level required, you can
easily install it by yourself however,
additional help will be useful
Read and understand all
INSTALLATION
PRODUCT
TIME
- 1.5 Hours
Time to install this should only
take about an hour and a half
Proper installation of this kit required knowledge of the factory
recommended procedures for removal and installation of original
equipment components. We recommend that the factory shop manual
and any special tools needed to service your vehicle be on hand during
the installation. Installation of this kit without proper knowledge of the
factory recommended procedures may affect the performance of these
components and the safety of the vehicle
• Always wear eye protection when operating power tools
Inspect all contents of this package to make sure product is not damaged
and all installation hardware has been included. If parts are missing from
kit, please be prepared to provide the following information
1. Name of purchase location
2. Bar Code on side of box
3. Date above bar code
4. Date inside box cover
NEED HELP?
MANUAL
REQUIRED
855-680-9595
Advertisement
Related Manuals for DV8 OFFROAD MPT4-01
Summary of Contents for DV8 OFFROAD MPT4-01
- Page 1 1. Name of purchase location Customer Service: 855-680-9595 2. Bar Code on side of box DV8 Offroad is not responsible for any bodily injury or harm to you 3. Date above bar code or your vehicle as a result of an improper install.
- Page 2 INSTALLATION MANUAL Begin by unpacking all items and inspecting for missing pieces or damage. If you have any concerns, please contact the company the product was purchased from. Extra hardware may be included with the product. HARDWARE INCLUDED (10) M6x15mm Allen head bolts (10) M6 Washers| (2) Aluminum Spacers...
- Page 3 INSTALLATION MANUAL STEP 3 | Flip the panel over and using the M6 hardware and a #4 allen head, install the lower bracket as shown. Ensure to also leave this loose for adjustment. 855-680-9595 NEED HELP?
- Page 4 INSTALLATION MANUAL STEP 4 | Use a trim clip tool to pry back the end caps on the rear grab handles. Using a 10mm, remove both bolts on the handle and send off to the side. These will be reused.. STEP 5 | Using the trim pry tool, remove the plastic caps on the panel...
- Page 5 INSTALLATION MANUAL STEP 6 | Install the provided aluminum spacer into the hole using the stud side. Tighten down with your hand. STEP 7 | Hold up the molle panel and using the factory hardware AND handle, secure the upper mount to the factory holes using a 10mm socket.
- Page 6 INSTALLATION MANUAL STEP 8 | Using the provided M6 hardware, secure the lower bracket to the aluminum spacers. 855-680-9595 NEED HELP?
- Page 7 INSTALLATION MANUAL STEP 9 | Once mounted, center the male so that it has equal spacing around the edge. Avoid having the panel rest against the interior of the vehicle. Using a #4 allen head, tighten the panel against the upper and lower brackets. 855-680-9595 NEED HELP?
- Page 8 INSTALLATION MANUAL STEP 10 | Double check all hardware is secure and then repeat steps 1-9 for the driver side. Congratulations you are done installing the DV8 Land Cruiser Rear Window Molle Panels. 855-680-9595 NEED HELP?
Need help?
Do you have a question about the MPT4-01 and is the answer not in the manual?
Questions and answers