Advertisement
MOLLE DOOR POCKET
18+ WRANGLER JL
20+ GLADIATOR JT
MPJL-06
TOOLS
REQUIRED
- T-20 Torx Bit
- Preferred Cutting tool
WARNINGS/CAUTIONS BEFORE STARTING INSTALLATION
Before you install this kit —
instructions, warnings, cautions, and notes contained in
this installation instruction guide. Consult your vehicle
owner's manual for proper disconnection of electrical and
lifting of vehicle if required for installation of this product.
This install may require some technical skills and
knowledge of basic mechanical work. If you do not feel that
you are capable of performing this install please take this
product to a trained professional.
After reading this guide please contact us with any
questions or concerns before installing product.
Customer Service: 855-680-9595
DV8 Offroad is not responsible for any bodily injury or harm to you
or your vehicle as a result of an improper install.
6400 SYCAMORE CANYON BLVD.
RIVERSIDE, CALIFORNIA 92507
855-680-9595
WWW.DV8OFFROAD.COM
SKILL
LEVEL
- Novice/Intermediate
- 1 (you)
Little skill level required, you can
easily install it by yourself however,
additional help will be useful
Read and understand all
PRODUCT
INSTALLATION
TIME
- 1 Hour
Time to install this should only
take about an hour
Proper installation of this kit required knowledge of the factory
recommended procedures for removal and installation of original
equipment components. We recommend that the factory shop manual
and any special tools needed to service your vehicle be on hand during
the installation. Installation of this kit without proper knowledge of the
factory recommended procedures may affect the performance of these
components and the safety of the vehicle
• Always wear eye protection when operating power tools
Inspect all contents of this package to make sure product is not damaged
and all installation hardware has been included. If parts are missing from
kit, please be prepared to provide the following information
1. Name of purchase location
2. Bar Code on side of box
3. Date above bar code
4. Date inside box cover
NEED HELP?
MANUAL
REQUIRED
855-680-9595
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for DV8 OFFROAD MPJL-06
Summary of Contents for DV8 OFFROAD MPJL-06
- Page 1 1. Name of purchase location Customer Service: 855-680-9595 2. Bar Code on side of box DV8 Offroad is not responsible for any bodily injury or harm to you 3. Date above bar code or your vehicle as a result of an improper install.
- Page 2 INSTALLATION MANUAL Begin by unpacking all items and inspecting for missing pieces or damage. If you have any concerns, please contact the company the product was purchased from. Extra hardware may be included with the product. STEP 1 | Using your preferred cutting tool, cut away the factory door pocket netting, leaving the top elastic band in place.
- Page 3 INSTALLATION MANUAL STEP 2 | Optional: If you would like to remove the elastic band and netting use a pair of Needle Nose Pliers to grip the elastic band, pull on the band/netting until guide wire can be seen. Remove the guide wire, netting and elastic band.
- Page 4 INSTALLATION MANUAL STEP 3 | Slide the (3) DV8 door Molle Pocket tabs behind the factory door pocket trim. NEED HELP? 855-680-9595...
- Page 5 INSTALLATION MANUAL STEP 4 | Using a T20 Torx Bit, remove the factory door pocket hardware and set aside. STEP 5 | Using the provide hold down bracket and factory hardware, secure the DV8 Molle Pocket in place. NEED HELP? 855-680-9595...
- Page 6 INSTALLATION MANUAL STEP 6 | Ensure all hardware is secure. Congratulations Installation of the DV8 Molle Pockets is now compete. NEED HELP? 855-680-9595...
Need help?
Do you have a question about the MPJL-06 and is the answer not in the manual?
Questions and answers