Download Print this page
DV8 OFFROAD MPJK-08 Installation Manual

DV8 OFFROAD MPJK-08 Installation Manual

Rear door slim molle pockets

Advertisement

Quick Links

REAR DOOR SLIM MOLLE POCKETS
11-18 JEEP JK 4 DOOR
MPJK-08
TOOLS
REQUIRED
- T-25 Torx Tool
- Pliers
- Phillips Head Screwdriver
- Preferred Cutting Tool
WARNINGS/CAUTIONS BEFORE STARTING INSTALLATION
Before you install this kit —
instructions, warnings, cautions, and notes contained in
this installation instruction guide. Consult your vehicle
owner's manual for proper disconnection of electrical and
lifting of vehicle if required for installation of this product.
This install may require some technical skills and
knowledge of basic mechanical work. If you do not feel that
you are capable of performing this install please take this
product to a trained professional.
After reading this guide please contact us with any
questions or concerns before installing product.
Customer Service: 855-680-9595
DV8 Offroad is not responsible for any bodily injury or harm to you
or your vehicle as a result of an improper install.
555 E Queen Creek Rd
Bldg A
Chandler, AZ 85286
WWW.DV8OFFROAD.COM
SKILL
LEVEL
- Novice/Intermediate
- 1 (you) person
Little skill level required, you can
easily install it by yourself however,
additional help will be useful
Read and understand all
INSTALLATION
PRODUCT
TIME
- .5 Hour
Time to install this should only
take about half an hour
Proper installation of this kit required knowledge of the factory
recommended procedures for removal and installation of original
equipment components. We recommend that the factory shop manual
and any special tools needed to service your vehicle be on hand during
the installation. Installation of this kit without proper knowledge of the
factory recommended procedures may affect the performance of these
components and the safety of the vehicle
• Always wear eye protection when operating power tools
Inspect all contents of this package to make sure product is not damaged
and all installation hardware has been included. If parts are missing from
kit, please be prepared to provide the following information
1. Name of purchase location
2. Bar Code on side of box
3. Date above bar code
4. Date inside box cover
NEED HELP?
MANUAL
REQUIRED
855-680-9595

Advertisement

loading
Need help?

Need help?

Do you have a question about the MPJK-08 and is the answer not in the manual?

Questions and answers

Summary of Contents for DV8 OFFROAD MPJK-08

  • Page 1 1. Name of purchase location Customer Service: 855-680-9595 2. Bar Code on side of box DV8 Offroad is not responsible for any bodily injury or harm to you 3. Date above bar code or your vehicle as a result of an improper install.
  • Page 2 INSTALLATION MANUAL Begin by unpacking all items and inspecting for missing pieces or damage. If you have any concerns, please contact the company the product was purchased from. Extra hardware may be included with the product. HARDWARE INCLUDED (2) M5x30mm Phillips Head Screws (2) Spacers (2) Flat Washers (2) “L”Shaped Mounting Tabs...
  • Page 3 INSTALLATION MANUAL STEP 2 | Optional: If you would like to remove the elastic band and netting, pull on the netting/elastic band with a firm grip until the guide wire can be seen. Remove the guide wire netting and elastic band.
  • Page 4 INSTALLATION MANUAL STEP 4 | Install the DV8 Rear Molle Pocket by pressing in the pocket tabs between the door panel and the factory door pocket trim panel. STEP 5 | Put the provide spacer, hardware, flat washer and mounting tab together as shown.
  • Page 5 INSTALLATION MANUAL STEP 6 | Place the bent end of the tab into the slot at the bottom of the pocket. STEP 7 | Use a phillips head screw driver to secure the Molle Pocket in place. 855-680-9595 NEED HELP?
  • Page 6 INSTALLATION MANUAL STEP 8 | Double check that the mounting hardware is secure. Congratulations, installation of the DV8 JK Rear Door Slim Molle Pockets is now complete. 855-680-9595 NEED HELP?