Page 1
V1.0.5 KRM-404A KRM-503A KRM-802A www.konvision.com KRM-902A KRM-1002A USER MANUAL KRM series Rackmount Konvision LCD Monitor w w w k o n v i s i o n c o m...
Page 2
1. Main Menu: ......14 2. Sub Menu: ......14 About This Manual Status: ........14 Picture Setting: ......15 The instructions in this manual are for KRM series Rackmount. Img.Adj: ........15 Please confirm the model number of the device before reading this manual.
9. Do not place this product at unstable places · Do not paste or stick any viscous markers on suppliers except KONVISION or its authorized such as cars, shelves or tables, as it is easy to the screen. packing material suppliers.
Marker Setting Features Parts and Functions - Show frame borders, center marker, and safety area, etc. High Brightness LCD Panel Front View - High brightness, high contrast, high-speed Scan mode KRM-404A Front View: (Note: same operation for the 4 front panels) response and wide viewing angle technology makes the monitor can be used under variety - Scan mode includes Full Scan, Over Scan,...
Page 5
KRM-902A Front View: (Note: same operation for the 2 front panels) KRM-404A, KRM-802A, KRM-902A and KRM-1002A monitor front panel instructions: Tally indicator MENU Button It is controlled by the tally function of the RS232 port, with Press to display the on-screen menu, and press the two colors red and green.
Page 6
KRM-503A Monitor Front View: ASPECT/F4 button UP/F1 button Press this button to select the display ratio. While in the menu, press this button to select the up The following changes will occur in the screen display operation. ratio: When not in the menu, press the UP button to achieve other function keys, the function keys can be set in the Auto Full...
Page 7
KRM-902A Monitor Front View:(Note: 1,2 each interface part corresponds to a screen) KRM-503A Rear View:(Note: 1,2,3 each interface part corresponds to a screen) KRM-802A Monitor Front View:(Note: 1,2 each interface part corresponds to a screen) KRM-1002A Monitor Front View:(Note: 1,2 each interface part corresponds to a screen)
SDI/Video input terminal GPI 3/4 2. Sub Menu: Menu Operation Section SDI/Video input terminal can be used to input SDI GPI interface: Status: signal or Video signal for monitoring. Menu Operation SDI OUT terminal SDI OUT terminal can output the input SDI signal to Press MENU to enter the main menu, then press other devices.
Page 9
Picture Setting: Img.Adj: Colour: Audio: Menu item Description Sub menu items Description Sub menu items Description Menu item Description Image Size [FILL ASPECT]Original ratio of the Volume Speaker volume adjustment. signal source.[Full Screen]Full Color space [Do not choose]Color space choice Brightness Brightness Adjustment.
Page 10
Marker Setting: Scope:(only for SDI signal) Sub menu items Description Sub Menu Items Description Marker Level [White]Maker line is white. UMD Char Static UMD display, UMD characters [Gray]Marker line is gray. can be manually set. [Black]Marker line is black. UMD characters can be arbitrarily set ·...
Factory Reset Sub Menu Description Sub Menu Description Sub Menu Description Vector [Off]Turn Off TC Mode.[LTC]Time Source Char Source names can be customized UpKey(F3) Up button can be customized into code display as LTC mode.[VITC1] The source name can be set freely other function keys: ASPECT, Time code display as VITC1.[VITC2] in 5 "xxxxx".
Page 12
KRM-503A monitor size KRM-902A monitor size warranty card Front view (mm) Front view (mm) User Top view (mm) Address Postal Code Model. No Serial Number Top view (mm) Warranty Date Purchase Date Replacement parts Replacement parts Item Contents of Reparation Remark name quantity...
Need help?
Do you have a question about the KRM Series and is the answer not in the manual?
Questions and answers