Subscribe to Our Youtube Channel
Related Manuals for Konvision KVM-5X series
Summary of Contents for Konvision KVM-5X series
- Page 1 KVM-5X series / KVM-6X series LCD Monitors USER MANUAL V3.3.2 Shenzhen Konvision Technology Co., Ltd http://www.konvision.com...
-
Page 2: Table Of Contents
Shenzhen Konvision Technology Co,.Ltd www.konvision.com Contents Notes..........................4 Security........................5 Features........................7 Parts and Functions....................11 A: Front View....................11 B: Rear View..................... 14 OSD Menu.........................17 Menu Operation:....................17 Menu Item Description..................18 1. Main Menu:....................18 2. Sub Menu:..................... 19 Status:......................19 Function Key:....................20 Picture:.......................22... - Page 3 Shenzhen Konvision Technology Co,.Ltd www.konvision.com AC Power Supply Connection.................. 49...
-
Page 4: Notes
Shenzhen Konvision Technology Co,.Ltd www.konvision.com Notes For the safety use of products, please read the following instructions regarding the installation, use and maintenance carefully. . Please read the product safety and operating instructions carefully before the product is operated. . Please keep the safety and operating instructions for future reference. -
Page 5: Security
Shenzhen Konvision Technology Co,.Ltd www.konvision.com 13. Please do not spray any liquid things and/or add any objects into the monitor, it might cause voltage instability and short-circuit, also can easily cause fires and blackouts. 14. If do not use the device for a long time, please unplug the power cord from the AC outlet. - Page 6 Transportation - This monitor is precise equipment and need professional packing materials to transport. So do not to use packing materials provided by suppliers except KONVISION or its authorized packing material suppliers. When the following situations occur, please turn off the power, do not insert the plug and contact a professional service staff to deal with timely.
-
Page 7: Features
Shenzhen Konvision Technology Co,.Ltd www.konvision.com The following does not belong to failures: 1. If the static image displayed too long, it will have residual image, which should be attributed to the characteristics of LCD display but not a failure. Residual image will disappear automatically after a period of time. - Page 8 Shenzhen Konvision Technology Co,.Ltd www.konvision.com Y/C Input - Decomposition for the luminance signal (Y) and chrominance signals (C) of the video signal can be input through this connector. SDI Input - Support multi-format SDI input, SD-SDI, HD-SDI, 3G SDI - Support SMPTE425M-A/B 4:4:4 signals.
- Page 9 Shenzhen Konvision Technology Co,.Ltd www.konvision.com HV Delay - Display horizontal and vertical blanking area of SDI1 input signal. Color Space - Color space include: Rec 709、 EBU、 DCI P3 D65、 SMPTE C、 DCI P3、 USER1、 USER2、 USER3.(This function only available to KVM-6X)
- Page 10 Shenzhen Konvision Technology Co,.Ltd www.konvision.com Histogram - YRGB histogram displays the hue distribution of the entire image under SDI input condition, can intuitively display exposure of the image, display R, G, B 3 channels independently. Vector scope - Vector UV analysis for color bar signal input Pixel Measurement - User can measure any pixel’s specific position and RGB value, also can compare the...
-
Page 11: Parts And Functions
Shenzhen Konvision Technology Co,.Ltd www.konvision.com Parts and Functions A: Front View (1) Tally Indicator It is controlled by the tally function of the RS232 port, with two colors red and green. (2) Speaker Stereo audio output. (3) Power Button and Indicator When the external AC power supply with electricity, the indicator light is red. - Page 12 Shenzhen Konvision Technology Co,.Ltd www.konvision.com (5) SDI2 Button and Indicator Press this button to select SDI2 signal input, indicator turns blue. (6) ANALOG Button and Indicator Light Press this button to select input signal between YPbPr、Video、 S-video, indicator turns blue.
- Page 13 Shenzhen Konvision Technology Co,.Ltd www.konvision.com (13) VOLUME(LETF/RIGHT) Knob When in OSD main menu, press this button to select different main menu items, when in sub-menu, press this button to adjust the parameter of the selected item. When not in OSD menu, press this button for shortcut functions: volume, HD volume.
-
Page 14: B: Rear View
Shenzhen Konvision Technology Co,.Ltd www.konvision.com B: Rear View (1) RS422 IN and RS422 OUT RS422 input and output interfaces. RS422 use TSL3.1 or TSL4.0 protocol to control. According to the protocol, it can realize UMD and Tally control. RS422 IN Signal name... - Page 15 In shortcut functions: Turn the knob to adjust the value of Brightness, Contrast and Chroma respectively. Ethernet port for remote network control. Thought this port, along with software “Konvision Device Controller”, you can achieve remote controlling to the monitor easily. (remote control software & instructions please contact with the dealer) (3) GPI...
- Page 16 Shenzhen Konvision Technology Co,.Ltd www.konvision.com not connect. RS232-RX, for MCU program upgrade, please contact the dealer for upgrade operation. When the program is not upgraded, the suspension is not connect. GPI4 when connect GND, GPI4 works, GPI4 function can be...
-
Page 17: Osd Menu
Shenzhen Konvision Technology Co,.Ltd www.konvision.com (10) AUDIO(IN/OUT) Audio in used for analog signal input, Audio out used for monitoring with 3.5mm earphone. (11) AC IN 100-240V AC power supply (12) DC 12V IN 12V DC power supply The interface pins are defined as:... -
Page 18: Menu Item Description
Shenzhen Konvision Technology Co,.Ltd www.konvision.com 2. IMAGEADJ(UP/DOWN) Knob: In the main menu or sub-menu, turn the VOLUME knob to select different items. 3. VOLUME(LETF/RIGHT) Knob: In the main menu, turn the VOLUME(right) knob to enter the sub-menu. In the sub-menu, turn VOLUME(right/left) knob to select the sub-menu item operation. -
Page 19: Sub Menu
Shenzhen Konvision Technology Co,.Ltd www.konvision.com 2. Sub Menu: Status: Status Menu item Description Source&Format Current window input signal and resolution The current window input signal line frequency The field frequency of the current window input signal Color Temp The current color temperature... -
Page 20: Function Key
Shenzhen Konvision Technology Co,.Ltd www.konvision.com Function Key: Function Key Menu item Setting Description Image Size The Function keys can be set to the No Definition following functions: Image Size, static frame Definition, static frame, Time Code Display, Time Code Display... - Page 21 Shenzhen Konvision Technology Co,.Ltd www.konvision.com Blue Mode Gray Mode Marker Setting Same as above Same as above Same as above Same as above Same as above Same as above Same as above Same as above GPI1 Blue Mode Can be set to the following functions:Blue...
-
Page 22: Picture
Shenzhen Konvision Technology Co,.Ltd www.konvision.com Picture: Picture Menu item Setting Description Backlight 0-100 Backlight Adjustment Standard The parameters of brightness, contrast, Picture Mode Customize sharpness, color, hue in Factory Default. Custom is for user definition Brightness 0-100 Brightness Adjustment Contrast... -
Page 23: Image
Shenzhen Konvision Technology Co,.Ltd www.konvision.com Green Gain 0-255 Green and Blue. It will save the color Blue Gain 0-255 temperature setting automatically. Red offset 0-255 Green offset 0-255 Blue offset 0-255 Image: Image Menu item Setting Description Image Size FILL ASPECT... - Page 24 Shenzhen Konvision Technology Co,.Ltd www.konvision.com Under Scan 5% 105% image display Part Zoom in <Right>Enter, <PIP>Part Zoom in any part of the Zoom in picture, to watch picture details more clearly, and assist for focus. Gray Mode Monochrome mode with...
- Page 25 Color Space Choose DCI Color Space Choose Rec2020 Color Space Choose User1 Color Space Choose User2 (Remark: 1. KVM-5X series only support Rec709 and Bypass. 2. User1 and user2 option, support user load their own LUT table, store in there, specific instructions please...
-
Page 26: Audio
Shenzhen Konvision Technology Co,.Ltd www.konvision.com calibration function when misled to the function. Audio: Audio Menu item Setting Description Volume 0－100 Speaker volume adjustment Headphone Volume 0－100 Headphone volume adjustment Audio Out Mode Normal Left and right channel out (only for SDI and HDMI/DVI... - Page 27 Shenzhen Konvision Technology Co,.Ltd www.konvision.com CH7&CH8 CH5&CH6、CH7&CH8. When in HDMI Signal: HDMI embedded audio select in CH1&CH2. Audio Level Meter Turn on/off audio level (only SDI/HDMI/DVI meter display signal) Audio Display Channels 1-4 Channel When in SDI Signal: (only SDI/HDMI/DVI...
-
Page 28: Marker
Shenzhen Konvision Technology Co,.Ltd www.konvision.com (only SDI/HDMI/DVI Vertical horizontal/vertical signal) Audio Phase Meter Turn on/off Audio Phase (only SDI/HDMI/DVI Meter display signal) Audio Phase Channel CH1&CH2 When in SDI Signal: (only SDI/HDMI/DVI CH3&CH4 SDI Audio Phase Channel signal) CH5&CH6 can be selected in CH7&CH8... - Page 29 Shenzhen Konvision Technology Co,.Ltd www.konvision.com Marker Setting Menu item Setting Description Marker Enable All markers on All markers off Marker Select NO marker display Marker display 4:3 16:9 Marker display 16:9 15:9 Marker display 15:9 14:9 Marker display 14:9 13:9 Marker display 13:9 1.85:1...
-
Page 30: Scope
Shenzhen Konvision Technology Co,.Ltd www.konvision.com Black filled up with black Scope: Scope (only for SDI/HDMI/DVI signal) Menu item Setting Description Waveform Mode Turn off the waveform mode Display Y(luminance) waveform Display YCbCr waveform LUMA Display Y (luminance) waveform, one-to-one correspondence be-... - Page 31 Shenzhen Konvision Technology Co,.Ltd www.konvision.com will alarm when measured waveform reach or exceed the value you set and mark them with Waveform Scale Digital Display in digital Display in percentage of luminance Histogram Mode Turn off the histogram mode LUMA...
-
Page 32: Embedded Code
Shenzhen Konvision Technology Co,.Ltd www.konvision.com Green Focus color use Green Blue Focus color use Blue White Focus color use White H Flip Turn on/off Horizontal flip Embedded code: Embedded code (only for SDI signal) Menu item Setting Description Time Code Display... -
Page 33: Layout
Shenzhen Konvision Technology Co,.Ltd www.konvision.com Layout: Layout Menu item Setting Description Layout Single Display only a single signal picture on screen Display two signals pictures simultaneously on screen, the sub picture in the main picture. Side by Side Display two signals pictures... - Page 34 Shenzhen Konvision Technology Co,.Ltd www.konvision.com any of other input signals. Can display 2 SDI simultaneously. Main Window Source Video Main Window select signal S-Video input among Video/ YPbPr S-Video/ YPbPr/ SDI1/SDI2/VGA/ HDMI SDI1 (Note: YPbPr is compatible SDI2 with RGB, YCbCr, YPbPr)
- Page 35 Shenzhen Konvision Technology Co,.Ltd www.konvision.com right-top corner. Center The second window in the center. Right Bottom The second window in the right-bottom corner. Left Bottom The second window in the left-bottom corner. Custom The second window is adjusted by user...
- Page 36 Shenzhen Konvision Technology Co,.Ltd www.konvision.com window blend directly to the main screen. Swap <Right> swap In PIP and PBP, turn right (this item shows in PIP/PBP windows the VOLUME knob to swap mode) the signal pictures between two windows (main window and second window).
- Page 37 Shenzhen Konvision Technology Co,.Ltd www.konvision.com when the eighth character selection is good, press the VOLUME (LETF / RIGHT) knob, then "ok" will turn red, rotate VOLUME (LETF / RIGHT ) Knob to "ok" will turn yellow, then press the MENU button to save the...
-
Page 38: Imd
Shenzhen Konvision Technology Co,.Ltd www.konvision.com IMD: Menu item Setting Description Turn on/off UMD Display display 128-255 UMD ID can be set any value from 128-255. It can be used for multidevice cascading, different different UMD ID devices. In remote control... - Page 39 Shenzhen Konvision Technology Co,.Ltd www.konvision.com Top Center UMD display at Top Center Bottom Center UMD display at Bottom Bottom Right Center UMD display at Bottom Right GREEN UMD character display in green White UMD character display in UMD Local Color...
- Page 40 Shenzhen Konvision Technology Co,.Ltd www.konvision.com character, press the VOLUME knob, the “ok” will turn red, rotate VOLUME knob to make the “ok” turn yellow, press MENU to save and exit. Only the “ok” turn yellow, it will save successfully when press MENU, otherwise, it will not save.
-
Page 41: Alarm
Shenzhen Konvision Technology Co,.Ltd www.konvision.com Alarm: Alarm Menu item Setting Description Alarm Display Turn off/on alarm display No Signal Alarm Turn off/on the signal alarm Black Frame Alarm Turn off/on the black frame alarm Static Frame Alarm Turn off/on the static frame... -
Page 42: Setup
Shenzhen Konvision Technology Co,.Ltd www.konvision.com EDH Error Alarm Turn off/on the EDH error alarm CRC Error Alarm Turn off/on the CRC error alarm Setup: Setup Menu item Setting Description Language Chinese Select Chinese/English in English menu OSD Settings Menu background from... - Page 43 Shenzhen Konvision Technology Co,.Ltd www.konvision.com 0-100 adjust Menu vertical position adjust Format Display Turn off the display info of signal format. Turn on the display info of signal format. Auto Automatically display info of signal format when signal changes, disappear after...
-
Page 44: Key Lock
Shenzhen Konvision Technology Co,.Ltd www.konvision.com Key Lock: Key Lock Menu item Setting Description Key Lock Key Lock Off When the key lock are turn on,only MENU VOLUME(LETF/RIGHT) knob, IMAGEADJ(UP/DOWN) knob can be operate, the rest can not. -
Page 45: Function Key
Shenzhen Konvision Technology Co,.Ltd www.konvision.com 3. Function Key Function Key Shortcut Menu Set up Setting Description Press main menu Function key Press main menu Function key to to set Press main menu Function key Press main menu Function key to... - Page 46 Shenzhen Konvision Technology Co,.Ltd www.konvision.com Dual picture operation: Continuous press PIP / PBP button, you can quickly from single-picture and dual-picture by the fast switch. In the dual picture, press the SWAP key, you can quickly exchange the left and right pictures. In the dual picture, press the WIN SEL button, you can select the picture window, at the same time, the selected window, you can also adjust the parameters alone, does not affect the other picture.
-
Page 47: Sdi 2K Signal Display Description
Shenzhen Konvision Technology Co,.Ltd www.konvision.com Line: The vertical position of the pixel Sample: The horizontal position of the pixel Y: The Y component value of the pixel (range between 0-1023) Y%: The percentage of the Y component of the pixel relative to the maximum, i.e., (Y... -
Page 48: Remote Control
Remote control the monitor through Ethernet: 1. Connected with monitor via LAN, and you can achieve remote controlling by software “Konvision Device Controller”.(Network remote control software and instructions please contact with the dealer) 2. The LAN cable should be parallel connection for both two ends, for example 568B LAN cable, with pin definition: orange-white, orange, green-white, blue, blue-white, green, brown-white, brown. - Page 49 Shenzhen Konvision Technology Co,.Ltd www.konvision.com AC Power Supply Connection Note: 1) Please hold the plug tight when you pull out the power cord. 2) Please do not connect the power supply before you insert the cable well. 3) Please use power cord match to monitors.
- Page 50 Shenzhen Konvision Technology Co,.Ltd www.konvision.com Warranty Card User Postal Code Address Product Serial Model Number Purchase Dealer Date Maintenance Record Replacement parts Contents of User Date Repairer Reparation Signature Name This warranty card should be filled in immediately when purchasing Please keep a proper record of this warranty card.
Need help?
Do you have a question about the KVM-5X series and is the answer not in the manual?
Questions and answers