Sigma Controls Myriad TPC LITE Instruction Manual page 13

ANALOG OUTPUT 4 (ANLOUT4) NOTE: Analog output 3 is a nonadjustable
retransmitted signal which 'mirrors' the analog input signal.
NOTE: Analog output 4 is retransmitted output which can be scaled to any value of the display.
With the display value highlighted, use the   buttons to select a display value at which a
selectable output occurs. Use   buttons to move to the output value for the previously
selected display value and adjust as described above.
NOTE: In the example shown 4.00 MA will be output from analog output 4 when the
display value is 0 inches.
From menu 2 use the   buttons to select 'SETUP' and press 'ENTER' to access the setup
menu.
SETUP
NOTE: The 'SETUP' menu allows access to the following items:
ELAPSED TIMERS
An elapsed timer is provided to allow the operator to monitor the run times of the three pumps.
1) Pump elapsed timer 1
2) Pump elapsed timer 2
3) Pump elapsed timer 3
4) Trend screen time base
5) Password
6) Time
7) Month
8) Date
9) Day
10) Alarm Horn on/off
13