SOMFY Amy 1 A/M Modes io Instructions Manual page 13

Amy 1 A/M Modes io
When Amy 1 A/M Modes io is added in TaHoma application and the temperature feedback to TaHoma is activated on Amy
1 A/M Modes io, the sensor measures the temperature inside the room (around Amy 1 A/M Modes io) and sends the
measured values to TaHoma. These temperature values can be consulted in TaHoma and can then be used for scenes to
optimize home automation.
CAUTION
Be careful in case of wind!
Automation provided by TaHoma and Amy 1 A/M Modes io allows the automatic use of a motorised product when
the temperature of the room equals a certain threshold, without consideration of the wind.
To maximize the protection of the motorised product from the wind and limit the risk of breaking, use a wind sensor
paired with the motorised product (sold separately).
In any case, a wind sensor does not protect against sudden gusts of wind. In the event of such weather risks,
deactivate the embedded temperature sensor (see below).
3.6.1.Adding Amy 1 A/M Modes io in TaHoma
To add or delete Amy 1 A/M Modes io in TaHoma, you need to access and use a TaHoma switch and TaHoma
application: you must have a compatible phone or mobile device.
The application is downloadable for free from Apple Store platforms and Google Play Store on the following mobile
devices:
®
▪ Apple iPhone mobile phone or mobile device with iOS operating system running iOS and later.
▪ Mobile phone or mobile device with operating system Android
The software version of the TaHoma application may be updated from time to time to add new features and services.
To add or delete Amy 1 A/M Modes io in TaHoma, follow the instructions in TaHoma application.
3.6.2.Activation/Deactivation of the temperature feedback
NOTICE
To do next steps, Amy 1 A/M Modes io must be switched on, with the front panel buttons activated (refer to
Switching on Amy 1 A/M Modes io).
By default, the temperature feedback to TaHoma is deactivated on Amy 1 A/M Modes io.
1] To check whether the temperature feedback to TaHoma is activated or
deactivated:
Briefly press once the On/Off button to see the settings feedback LED corresponding
to the current status:
▪ Orange LED blinks 4 times: the temperature feedback is deactivated.
▪ Orange LED blinks 2 times: the temperature feedback is activated.
2] To activate/deactivate the temperature feedback to TaHoma:
Briefly press twice successively the On/Off button to activate/deactivate the
temperature feedback:
▪ Orange LED blinks 2 times: the temperature feedback is activated.
▪ Orange LED blinks 4 times: the temperature feedback is deactivated.
©
Copyright 2024 SOMFY ACTIVITES SA. All rights reserved.
™
OS and later.
1]
0.5 s
0.5 s
2]
x2
0.5 s
x2
0.5 s
EN
13