SOMFY Amy 1 A/M Modes io Instructions Manual page 11

Amy 1 A/M Modes io
3.1.Up and Down buttons
NOTICE
The use of these buttons depends on the type of motorised products associated with Amy 1 A/M Modes io and the
control mode selected on it (refer to Mode selection).
With mode 1 selected
▪ Press the Up or Down button to raise or lower roller shutters, awnings,
screens, venetian blinds, or garage doors.
With mode 2 selected
▪ Briefly press the Up or Down button to switch on switch off the lighting or
heating.
▪ Press and hold the Up or Down button to increase / decrease progressively
the lighting or heating.
With mode 3 selected (Exterior Venetian Blinds)
▪ Briefly press the Up or Down button to tilt the slats.
▪ Press and hold the Up or Down button to raise or lower venetian blinds.
With mode 4 selected (Interior Venetian Blinds)
▪ Briefly press the Up or Down button to tilt the slats.
▪ Press and hold the Up or Down button to raise or lower venetian blinds.
The feedback LED flashes green during activation of the motorised product(s).
3.2.Stop/my button
▪ The motorised product(s) are being activated:
◦ Briefly press my to stop the motorised product(s) from activating.
▪ The motorised product(s) are stopped:
◦ Briefly press my to move the motorised product(s) to their favourite
position (my).
NOTICE
To use the favourite position (my) function, the motorised products must not be activated and their favourite position
(my) must be registered [refer to Saving or modifying the favourite position (my)].
©
Copyright 2024 SOMFY ACTIVITES SA. All rights reserved.
< 0.5 s < 0.5 s
> 0.5 s
> 0.5 s
< 0.5 s
< 0.5 s
> 0.5 s > 0.5 s
< 0.5 s
< 0.5 s
> 0.5 s > 0.5 s
EN
11