Subscribe to Our Youtube Channel
Related Manuals for Condair HumiLife MN Series
Summary of Contents for Condair HumiLife MN Series
- Page 1 IMPORTANT! Read and save these instructions. This manual to be left with the equipment. OPERATION MANUAL Condair HumiLife - The flexible room solution Condair MN Humidification and Evaporative Cooling...
- Page 2 Condair Ltd., except to the extent required for installation or maintenance of recipient's equipment. Liability Notice Condair Ltd. does not accept any liability due to incorrect installation or operation of the equipment or due to the use of parts/components/equipment that are not authorized by Condair Ltd.
-
Page 3: Table Of Contents
3.1.3 Service functions 3.1.3.1 Restarting the system 3.1.3.2 Accessing the fault list 3.1.4 Accessing info screen Remote control of the Condair MN via the HumiLife-App 3.2.1 Starting the HumiLife-App 3.2.2 Operating the home screen 3.2.3 Query maintenance information 3.2.4 Define zones as favorites 3.2.5... -
Page 4: Introduction
The information in these operating instructions is limited to the operation of the Condair MN in daily op- eration and is aimed at the operating personnel of the customer who have been instructed in this work This operation manual is supplemented by various separate items of documentation (e.g. - Page 5 If the documentation gets misplaced, please contact your Condair representative. Language versions This operation manual is available in other languages. Please contact your Condair representative for information. 2600433-E EN 2312...
-
Page 6: For Your Safety
For your safety General All persons tasked to perform work on the Condair MN must read and ensure they have understood the planning and installation instructions as well as the operating manual for the Condair MN before starting work. An understanding of the content of these planning and installation instructions and the operating manual is a basic prerequisite for protecting personnel from danger, avoiding improper installation and operating the device safely and properly. - Page 7 (remove the plug from the socket) before the central unit is opened. Warning! Risk of contamination of the system If the Condair MN is switched off, there is a risk of the water supply line and the internal water system becoming contaminated because the water system is no longer flushed regularly.
-
Page 8: Operation
Operation The Condair MN can either be operated locally via the control on the central unit (see Section 3.1) or remotely via the HumiLife-App (see Section 3.2). Local operation is given priority over remote control. Warning! Risk of contamination of the system After commissioning the Condair MN must not be switched off or disconnected from the power supply. -
Page 9: Setting The Humidification Of The Individual Rooms
3.1.2 Setting the humidification of the individual rooms Selected room Select the next room Select previous room Back to the homescreen Increased humidification (Factory setting 55 %rh) Moderate humidification (Factory setting 45 %rh) Low humidification (Factory setting 35 %rh) Switch off humidification 2600433-E EN 2312 Operation... -
Page 10: Service Functions
3.1.3 Service functions Carry out a filter change (see Section 4.2) Restart system (see Section 3.1.3.1) Accessing fault list (see Section 3.1.3.2) Back to the homescreen Operation 2600433-E EN 2312... -
Page 11: Restarting The System
3.1.3.1 Restarting the system Confirm system restart Cancel and back to the service menu 2600433-E EN 2312 Operation... -
Page 12: Accessing The Fault List
3.1.3.2 Accessing the fault list Close the window and return to the service menu Operation 2600433-E EN 2312... -
Page 13: Accessing Info Screen
3.1.4 Accessing info screen Current firmware version Serial number of the Condair MN Back to the homescreen 2600433-E EN 2312 Operation... -
Page 14: Remote Control Of The Condair Mn Via The Humilife-App
Condair MN has been comissioned the HumiLife-App was installed on your mobile device and a user account (with your e-mail address and password) was created and that your Condair MN was correctly registered in the cloud and assigned to your user account. If not, please contact your Condair representative –... -
Page 15: Starting The Humilife-App
3.2.1 Starting the HumiLife-App 1. Start the HumiLife-App on your mobile device. The login screen appears. 3. Enter your username (e-mail address) and password. Confirm your entries by pressing the <Login> button. The HumiLife-App home screen appears. Note: If you have forgotten the password, press the <Forgot password?> button. You will then be guided step by step through the process of setting a new password 4. -
Page 16: Query Maintenance Information
3.2.3 Query maintenance information Press the graphics icon on the home screen. The maintenance information screen appears (figure on right). The maintenance history (maintenances carried out) as well as the remaining time until the next maintenance (e.g. annual maintenance, filter change, etc.) are displayed here. Operation 2600433-E EN 2312... -
Page 17: Define Zones As Favorites
3.2.4 Define zones as favorites Individual or all zones can be added as favorites for direct access to the zone control on the home screen. • To do this, press the <Add favorite> button. The favorite selection screen appears (figure on the right). -
Page 18: Zone Overview
3.2.5 Zone overview • On the home screen, press the <All Zones> button. The zone overview screen appears. The current humidity value is displayed for each zone. Grayed out zones indicate that humidification is turned off in these zones. • By pressing the button at the top left of the zone overview, you can switch between list view and icon view of the zone overview. -
Page 19: Zone Control
3.2.6 Zone control • Access the zone control of the desired zone via the corresponding favorites button (see Section 3.2.4) or via the zone overview (see Section 3.2.5). The Zone Control screen for the selected zone appears. Here you have the following options: Back to the zone overview or back to the home screen. -
Page 20: Query The Humidity Profile Of A Zone
3.2.6.1 Query the humidity profile of a zone On the "Zone control" screen of the selected zone, press the graphic icon. The graphic of the humidity profile appears (figure on the right). Here you can: • Use the <Day>, <Week> and <Month> buttons to display the graphical progression of the humidity value in% RH for the current day, the current week or the current month. -
Page 21: User Settings
User settings Press the <More> button on the home screen. The user menu appears. – Under "User management" you can: • View the details of your user account. • Change the user password. • Log out. • Delete the user account. •... - Page 22 Under "My devices" you ca: • Add a new device to your account. Please contact your Condair representative in this behalf. • Select a device from the list of devices in your account. Then the screen with the device settings and other functions appears.
- Page 23 – Under "Language": • Change the dialog language of the HumiLife-App. – Under "Info": • View the current software version of the HumiLife-App and information about the time zone. 2600433-E EN 2312 Operation...
-
Page 24: Servicing The System
To ensure hygienic operation the Condair MD system must be serviced by authorized service special- ists once a year. The service is regulated in a corresponding service contract. Condair arranges and carries out the annual service. After completion, the service must be documented in the customer's service log. -
Page 25: Replacement Of The Water Filter(S)
The frequency for replacing the water filter (s) depends on the water quality. The service life of the filters is continuously monitored by the control software of the Condair MN. As soon as the message "Replace filter" appears on the display, the water filter(s) must be replaced. Proceed as follows: 1. - Page 26 2. You will now be guided through the filter change step by step with corresponding messages and images on the display. Note: If your system is equipped with two filters, always carry out the respective steps on both filters. Message Action •...
- Page 27 • Place the new filter cartridge under the filter adapter so that the label faces forward and the notch in the filter cartridge is located under the left groove on the filter adapter. • Press the <Continue> button. • Push the filter adapter down and at the same time turn the filter cartridge counterclockwise.
- Page 28 • Press the <OK> button. The Condair MN is started and is ready for use again after approx. 20 minutes. The homescreen is displayed. Servicing the system 2600433-E EN 2312...
- Page 29 Notes...
- Page 30 Notes...
-
Page 31: Warranty
The warranties set forth herein are in lieu of all other warranties expressed or implied by law. No liability whatsoever shall be attached to CONDAIR until said products have been paid for in full and then said liability shall be limited to the original purchase price for the product. - Page 32 Buy authentic Condair parts factory direct. Would you recommend Condair? Take our two question survey. U.S.A. 1021 6th Street Racine, WI 53403 CANADA 2740 Fenton Road Ottawa, Ontario K1T 3T7 TEL: 1.866.667.8321 EMAIL: na.info@condair.com WEBSITE: www.condair.com...
Need help?
Do you have a question about the HumiLife MN Series and is the answer not in the manual?
Questions and answers