Crestron Digital Graphics Engine 1000 Product Manual page 41

HTTPS Settings
l
HTTPS Proxy: Turn the toggle on to allow the device to use an HTTPS proxy server.
o
HTTPS Proxy Address: Enter the IP address or the FQDN of the HTTPS proxy server.
o
HTTPS Proxy Port: Select the port number of the HTTPS proxy server using the drop-down
o
list.
Username: Enter the username required for the HTTPS proxy server.
o
Password: Enter the password required for the HTTPS proxy server.
o
Product Manual — Doc. 9462A DGE-1000 • 38