Cisco Nexus 9364E-SG2 Hardware Installation Manual page 47

Rack Specifications
•
•
•
•
•
Overview of Racks
Install the switch in these types of cabinets and racks, assuming an external ambient air temperature range of
0 to 104°F (0 to 40°C):
• Standard perforated cabinets
• Solid-walled cabinets with a roof fan tray (bottom to top cooling)
• Standard open racks
Note
General Requirements for Cabinets and Racks
The cabinet or rack must meet these requirements:
Note
Overview of Racks, on page 41
General Requirements for Cabinets and Racks, on page 41
Requirements Specific to Standard Open Racks, on page 42
Requirements Specific to Perforated Cabinets, on page 42
Cable Management Guidelines, on page 43
• If you are using an enclosed cabinet, we recommend one of the thermally validated types, either standard
perforated or solid-walled with a fan tray.
• We do not recommend using racks that have obstructions (such as power strips). The obstructions could
impair access to field-replaceable units (FRUs).
This switch rack-mount kit contains the rack mounting brackets for 19-inch rack. To install the chassis in a
23-inch rack or an ETSI rack, you need adapter plates to accommodate the 19-inch rack mount brackets.
Cisco Nexus 9364E-SG2 (N9364E-SG2-Q) NX-OS-Mode Switch Hardware Installation Guide
A
A P P E N D I X
41