Cisco Nexus 9364E-SG2 Hardware Installation Manual page 24

Procure Tools and Equipment
Tip
Procedure
Step 1
Compare the shipment to the equipment list that is provided by your customer service representative. Verify that you
have received all of the ordered items.
The shipment should include:
• Switch chassis, which includes these installed components:
• Two power supplies: AC power supply units, with airflow direction the same for these + fan modules.
•
• Switch accessory kit
Step 2 Check the contents of the shipping box for damange.
Step 3
If you notice any discrepancies or damage, send this information to your customer service representative by email:
• Invoice number of the shipper (see oacking slip)
• Model and serial number of the missing or damaged unit
• Description of the problem and how it affects the installtion
Procure Tools and Equipment
Obtain these necessary tools and equipment for installing the chassis:
• Number 1 and number 2 Phillips screwdrivers with torque capability to rack-mount the chassis.
• 3/16-inch flat-blade screwdriver.
• Tape measure and level.
• ESD wrist strap or other grounding device.
• Antistatic mat or antistatic foam.
• Grounding cable sized according to local and national installation requirements; the required length
• Crimping tool for lug.
• Wire-stripping tool.
Cisco Nexus 9364E-SG2 (N9364E-SG2-Q) NX-OS-Mode Switch Hardware Installation Guide
18
Do not discard the shipping container when you unpack the switch. Flatten the shipping cartons and store
them. If you need to move or ship the system in the future, you will need this container.
depends on the proximity of the switch to proper grounding facilities. Cisco provides a 6 AWG lug in
the accessory kit.
Installing the Chassis