Related Manuals for PureLink BS-6000
Summary of Contents for PureLink BS-6000
- Page 1 BS-6000 6 CHANNEL 3G-SDI/HDMI VIDEO SWITCHER WITH CAMERA CONTROL, RECORDING, MEDIA PLAYER...
-
Page 3: Using The Unit Safely
USING THE UNIT SAFELY Before using this unit, please read below warning and precautions which provide important information concerning the proper operation of the unit. Besides, to assure that you have gained a good grasp of every feature of your new unit, read below manual. This manual should be saved and kept on hand for further convenient reference. -
Page 5: Table Of Contents
BS-6000 Production switcher User Manual V 1.3 Contents Overview ................Error! Bookmark not defined. Main Features ....................4 1.1. Rear Interfaces ....................4 1.2. Tally PIN Definition ..................5 1.3. SPECIFICATION ......................6 FRONT CONTROL PANEL................... 7 3.2 Keyboard Button ............................. 8 Multiview Output Layout ................ - Page 6 BS-6000 Production switcher User Manual V 1.0 6.2 Main Menu ............................. 21 6.2.1 System Settings ..........................22 6.2.2 Network Settings ........................... 22 6.2.3 Record Settings ..........................22 6.2.4 TSL Settings ..........................23 6.2.5 Tally Port Define ..........................23 6.2.6 Device Info ............................. 24...
-
Page 7: Overview
BS-6000 Production switcher User Manual V 1.3 1. OVERVIEW BS-6000 is a 6-channel 3G-SDI/HDMI/DVI/VGA multi-format video switcher that allows video switching, audio mixing, and different transition effects AND a highly efficient, multi-function product that includes an USB media player, program recorder to SD card, and Pan/Tilt/Zoom control for VISCA or PELCO controlled... -
Page 8: Main Features
BS-6000 Production switcher User Manual V 1.0 1.1. Main Features 6 channel inputs: 4x 3G-SDI and 2x FLEX DVI-I / HDMI / VGA / USB inputs 2x 3G-SDI & 1xHDMI PGM outputs, 1x 3G-SDI AUX output, 1x 3G-SDI & 1x HDMI multiview outputs ... -
Page 9: Tally Pin Definition
BS-6000 Production switcher User Manual V 1.3 1.3. Tally PIN Definition Definition Definition PGM-IN1 PVW-IN1 PGM-IN2 PVW-IN2 PGM-IN3 PVW-IN3 PGM-IN4 PVW-IN4 PGM-IN5 PVW-IN5 PGM-IN6 PVW-IN6... -
Page 10: Specification
BS-6000 Production switcher User Manual V 1.0 2. SPECIFICATION Video Inputs 4×3G/HD/SD-SDI, 2×HDMI 1080p 60/59.94/50/30/29.97/25/24/23.98 1080psF 30/29.97/25/24/23.98 SDI Input Format 1080i 60/59.94/50 720p 60/59.94/50/30/29.97/25/24/23.98 1080p 60/59.94/50/30/29.97/25/24/23.98/23.976 1080i 50/59.94/60 HDMI Input Format Inputs 720p 60/59.94/50/30/29.97/25/24/23.98 576i 50, 576p 50 SDI Video Rate... -
Page 11: Front Control Panel
BS-6000 Production switcher User Manual V 1.3 3. FRONT CONTROL PANEL Camera Control Audio Mixer Menu Control and Display T-bar Manual Transition Auto, Cut, FTB Transition Effects, MIX, WIPE, DP Luma Key, Chroma Key, PIP, POP, SHIFT USB Media Player Control... -
Page 12: Keyboard Button
BS-6000 Production switcher User Manual V 1.0 3.1 Keyboard Button Camera Control CAM1 and CAM2 buttons are for Camera 1, Camera 2. ZOOM IN and ZOOM OUT to adjust the size of the picture. Press the button, the button LED will be turned on to indicate that the manual mode is enabled. - Page 13 BS-6000 Production switcher User Manual V 1.3 CUT & AUTO CUT performs a simple immediate switch between Program and Preview. The selected transition WIPE, MIX or FADE is not used. AUTO performs an automated switch between Program and Preview. The selected transition WIPE, MIX or FADE will also be used.
- Page 14 BS-6000 Production switcher User Manual V 1.0 Luma Key Luma key consists of one video source containing the video image that will be stacked on top of the background. All the black areas defined by the luminance in the video signal will be made transparent so that the background can be revealed underneath.
- Page 15 BS-6000 Production switcher User Manual V 1.3 USB Media Player Control The video switcher has two USB ports for playing the USB media, including video and picture. Press USB5 or USB6 button to select the one which you want to control. The VD/PIC button is for switching the media format between video and picture.
-
Page 16: Multiview Output Layout
BS-6000 Production switcher User Manual V 1.0 3.1. Multiview Output Layout The multiview output provides confidence monitoring of all inputs and outputs on one display. The level meter of PGM audio is shown only in multiview. SDI/HDMI PGM out is without any overlays. -
Page 17: T-Bar Calibration
BS-6000 Production switcher User Manual V 1.3 4.2 T-Bar Calibration The T-Bar of the video switcher may happen to misalignment, when the origin of the coordinates offset the T-Bar calibration is necessary before using. 1) Power off the video switcher, and then press and hold button 1 and 2 of PVW at same time. Hold the buttons until all calibration complete. -
Page 18: Transition Control
BS-6000 Production switcher User Manual V 1.0 green border. 4.3.2 Transition Control 1) Transition without Effects CUT performs a simple immediate switch between Preview and Program views. This is no delay seamless switching, and the selected transition effect WIPE, MIX or FADE is not used. -
Page 19: Usb Media Player
BS-6000 Production switcher User Manual V 1.3 VGA and USB. The default format is HDMI. The switcher saves the settings when turn off the switcher. 4.3.5 USB Media Player 1) USB Media Player Setup Plug in the USB flash drive into the USB port (input 5 or input 6) in the side panel: Setup the video source of channel 5 or 6 to USB (refer to 4.3.4), then manage the USB media player... -
Page 20: Transition Effects
BS-6000 Production switcher User Manual V 1.0 4.4 Transition Effects 4.4.1 MIX Transition Press the MIX button to select a basic A/B Dissolve for the next transition. When button LED turns on it is active. Then use T-Bar or AUTO to operate the transition. And there are 3 different speed rates for choice from the menu. -
Page 21: Pip And Pop
BS-6000 Production switcher User Manual V 1.3 4.5 PIP and POP When the T-Bar located at B-BUS to active the PIP/POP, there will be a small image display on the top left corner of the PVW window as following image: Press button 1-6 from PVW row to switch the video source of PIP/POP. -
Page 22: Chroma Key
BS-6000 Production switcher User Manual V 1.0 Border Color White/ Red/ Blue/ Green White Exit 4.6 Chroma Key Turn on the Chroma Key, a color from the key source will be removed, revealing another background image behind it. Chroma Key is usually used for virtual studio, such as weather broadcasts, where the meteorologist appears to be standing in front of a large map. -
Page 23: Ptz Camera Remote Control
BS-6000 Production switcher User Manual V 1.3 5. PTZ Camera Remote Control 5.1 Camera Setting Two PTZ cameras can be control through the RS-422/232/485 port of the video switcher. You can pan, tilt, zoom two cameras separately by using a joystick and buttons. -
Page 24: Menu Settings
Note: TXD+ is connected to RXD+ of PTZ,TXD- is connected to RXD- of PTZ. BS-6000 does not process the PTZ return instruction. It can be used without connecting RXD + and RXD- of BS-6000. 6. Menu Settings 6.1 Status Menu The status menu includes Audio settings, and AUX and PGM out settings. -
Page 25: Output Format Setting
BS-6000 Production switcher User Manual V 1.3 embedded audio of Program video source. Press Master button to enable the Follow mode audio. Adjust the master fader to control the audio volume. 3) Earphone. Set the earphone audio source from IN1/IN2/IN3/IN4/IN5/IN6/PGM/XLR_IN/RAC_IN. The earphone port is a 3.5mm port. -
Page 26: System Settings
2) Clock and Setting. Access to system settings from the menu to switch the real-time clock shown in Analog or Digital. The time of clock can be set through the Windows clock utility program through the Ethernet. Please visit the BS-6000 product page to obtain the clock utility program. 6.2.2 Network Settings 1) IP Setting. -
Page 27: Tsl Settings
BS-6000 Production switcher User Manual V 1.3 Record Video Format H.264 (mp4) Record Video Resolution 1080p 60/50/30/25/24hz, 1080i 60/50hz 2) SD Card Install and Uninstall Install: Format SD card to exFAT or FAT32. Install Plug and press the SD card into the slot from the side of video switcher. -
Page 28: Device Info
PGM-IN6 PVW-IN6 6.2.6 Device Info The firmware version number can be checked from the Device Info in Main Menu. Such as” xx-xx-xx-xx- xx-xx-xx-xx-xx-xx” If you have further questions, please contact your PureLink dealer, call PureLink at 201-488-3232, or visit www.purelinkav.com...
Need help?
Do you have a question about the BS-6000 and is the answer not in the manual?
Questions and answers