Installing The Fan Assembly - Dell PowerEdge NM176 Hardware Owner's Manual

Figure 3-11. Installing and Removing the Fan Assembly
1 release levers (2)
4 hard drive 1 data cable 5

Installing the Fan Assembly

1 Align the holes in the fan assembly with the two fan assembly securing
posts. See Figure 3-11.
2 Lower the fan assembly until the release levers snap onto the securing
posts.
3 Route the cables in the fan assembly cable tray. See Figure 3-11.
4 Reconnect the hard drive 1 data cable to the hard drive. See Figure 3-11.
70
Installing System Components
5
2 power cable
cable tray
1
3
4
3
2
securing posts (2)