Installing The Cooling Shroud - Dell PowerEdge NM176 Hardware Owner's Manual

Figure 3-4. Installing and Removing the Cooling Shroud
1
1 tab

Installing the Cooling Shroud

1 Insert the tab on the side of the cooling shroud and the release latch into
the fan assembly. See Figure 3-4.
2 Push the cooling shroud down until the release latch snaps into place,
securing the shroud to the fan assembly.
3 Close the system. See "Closing the System" on page 55.
2 release latch
Installing System Components
3
2
3 cooling shroud
57