Closing The System - Dell PowerEdge NM176 Hardware Owner's Manual

Figure 3-3. Installing and Removing the System Cover
1 system cover

Closing the System

1 Ensure that you did not leave tools or parts inside the system.
2 Place the cover over the sides of the chassis, and slide the cover forward.
3 Tighten the thumbscrew at the back of the system to secure the cover. See
Figure 3-3.
4 Replace the system in the rack, and reconnect the peripheral cables.
5 Reconnect the system to the electrical outlet, and turn on the system.
2 thumbscrew
Installing System Components
1
2
55