Micromeritics MIC SAS II 5800 Installation Instructions And Checklist page 9

General Safety
I U
NTENDED SE
The Micromeritics Sub-Sieve AutoSizer (MIC SAS) II determines particle size, surface area, and
powder bed porosity by air permeability.
The instrument is intended to be operated by trained personnel familiar with the
proper operation of the equipment recommended by the manufacturer and as well as
relevant hazards involved and prevention methods. Other than what is described in
this manual, all use is seen as unintended use and can cause a safety hazard.
The instrument is intended to be used as per applicable local and national regulations.
T
RAINING
It is the customer's responsibility to ensure that all personnel operating or maintaining the
equipment participate in training and instruction sessions. All personnel operating, inspecting,
servicing, or cleaning this instrument must be properly trained in operation and machine safety
before operating this instrument.
ix
MIC SAS II 5800 Pre-installation Instructions and Checklist
580-42870-01 (Rev A) — Nov 2024