Storing Caller List Information In The Directory - Panasonic TG2550 - 2.4 Gigarange Cordless Phone Operating Instructions Manual

Using the Caller List

Storing Caller List Information in the Directory

You can store numbers that are in the Caller List into the directory.
Make sure that the handset is in the stand-by mode.
1
Lift the handset off the base unit.
OR
If the handset is off the base unit, press
or to enter the list.
2
Press
you want to store in the directory, and press
.
OK
• If the number requires editing, see page 27.
3
While the arrow points to "Save
directory" press
If there is no name information for the
caller, "Enter name" will be displayed.
a) If a name is not required, press
(Save key).
b) If a name is required, enter the name
(p. 32). When finished, press
(Save key).
• A beep sounds.
• The display will return to step 2. You can
continue storing other items. To return to
the stand-by mode, press
for 60 seconds.
• You can exit the programming mode any time by pressing
• If the display shows "Memory is full" in step 3, the display will return
to step 2. Press
To erase other stored items from the directory, see page 37.
• You cannot store caller information in the directory if a phone number is
not displayed.
28
or repeatedly to find the caller
OK
to exit the list.
(EXIT/CH)
.
OK
OK
or wait
(EXIT/CH)
10 new callers
∨ =New ∧ =Old
CINDY TURNER
1-234-456-7890
11:20A JAN12
H
Save directory
Clear
∨∧
OK=Yes
Enter name
#= ←→
OK=Save
Enter name
CINDY TURNER
#= ←→
OK=Save
.
(EXIT/CH)
3
X