Storing Caller List Information In The Directory - Panasonic KX-TG2563S Operating Instructions Manual

Using the Caller List
Storing Caller List Information in the Directory
You can store names and phone numbers that are in the Caller List into
the directory.
Make sure the unit is in the standby mode initially.
Press [_ or [_ to enter the Caller List.
2
Press [_ or (A0 repeatedly to find the
caller you want to store in the directory,
and press FWD/EDIT [] (Yes key).
,,If the number requires editing, see page 31.
Press [_[} or 1_ to select "Save
directory", and press FWD/EDIT []
(Yes key).
T_0 new calls
_=Directory
CINDY TURNER
1-234-456-7890
II:20A JAN.12 X3
_Editsavedirectory
YA _:Yes
Edit ]
_Save directory
YA _=Yes
Enter name
_ T:Next
Enter name
CINDY TURNkR
4_ ¥=Next
I °
CINDY TURNER
12344567890
If there is no name information for the
caller, "Enter name" will be
displayed.
a) If a name is not required, press [_
(Next key) and press FWD/EDIT []
(Savekey).
b) If a name is required, enter the name
(p. 40). When finished, press [_
(Next key) and press FWD/EDIT []
(Save key).
oA beep sounds.
,,To continue storing other items, repeat from
step 2.
,,To return to the standby mode, press
[FUNCTION/EXIT/CH}.
•You can exit the programming mode any time by pressing [FUNCTION/EXlT/CHJ
•If the display shows "Directory lull" in step 3, press IFUNCTION/EXlT/CH]
to exit the list. To erase other stored items from the directory, see page 45.
,,Afterthe maximumof 50 items has been stored,"Directory full" is also displayed.
,*You cannot store caller information in the
directory
if
a phone
number is not
displayed.
•It 3 beeps sound and the display shows "Save error", move closer to the base
unit and start again from step 1
32