Setting The Auto Talk Feature - Panasonic TG2550 - 2.4 Gigarange Cordless Phone Operating Instructions Manual

Setting the Auto Talk Feature

The Auto Talk feature allows you to answer a call by lifting the handset off
the base unit without pressing
the feature ON by programming. Your phone comes from the factory set to
OFF.
Make sure that the handset is in the stand-by mode.
1
Press
(FUNCTION/EDIT)
2
Press or
points to "Program".
3
Press
OK
4
Press or
points to "Talk switching".
5
Press
OK
6
Press or
Then press
OK
• A beep sounds.
• The display will return to the function list.
To return to the stand-by mode, press
or wait for 60 seconds.
(EXIT/CH)
• You can exit the programming mode any time by pressing
• In order to view Call Display information before answering a call, leave
the Auto Talk feature OFF.
(TALK)
.
repeatedly until the arrow
(Yes key).
repeatedly until the arrow
(Yes key).
to select "On" or "Off".
(Save key).
. If you want to use this feature, turn
H
∨∧
H
∨∧
∨∧
Ringer volume
Program
OK=Yes
Set dial mode
Talk switching
OK=Yes
Auto talk
:Off
OK=Save
Auto talk
:On
.
(EXIT/CH)
17