Table of Contents
Advertisement
1
Press
(FUNCTION/EDIT)
2
Press
or
arrow points to "Program", and press
(Yes key).
OK
3
While the arrow points to "Save
directory", press
4
Enter a name up to 15 characters with the
dialing buttons,
• See the steps for entering names and
symbols (p. 32).
• If a name is not required, press
(Next key) and go to step 6.
5
Press
OK
6
Enter a phone number up to 22 digits.
• If you misdial, press
erased from the right.
7
Press
OK
• A beep sounds.
• The display will return to step 2. You can
continue storing other items after pressing
(Yes key).
OK
• To return to the stand-by mode, press
or wait for 60 seconds.
(EXIT/CH)
• If a pause is required for dialing,
number, in step 6 above, counting as one digit (p. 46).
• You can exit the programming mode any time by pressing
• If the display shows "Memory is full" in step 3, the handset will return
to the function list. Erase other stored items from the directory (p. 37).
.
repeatedly until the
(Yes key).
OK
(←) or
(→).
(*)
(#)
(Next key).
BACK
(Save key).
(PAUSE)
OK
. Digits are
can be stored in a phone
Ringer volume
H
Program
∨∧
OK=Yes
H
Save directory
Set flash time
∨∧
OK=Yes
Directory=
0 item
Enter name
#= ←→
OK=Next
Enter name
Tom Jones
#= ←→
OK=Next
Enter phone no.
0987654321
OK=Save
Tom Jones
0987654321
.
(EXIT/CH)
31
Advertisement
Table of Contents
